Technical questions for the MPC2000xl and the MPC2000
By Doron Fri Aug 05, 2005 10:20 pm
...peace-peace...does anyone know where i can get a 25 pin usb-scsi cable?...speak back...thanks...
User avatar

By dj dcypher Fri Aug 05, 2005 10:26 pm
not sure, but the MPC won't read anything using this cable..... it's been tried.
By Doron Fri Aug 05, 2005 10:38 pm
what i'm tryin' to do is recover some files on the xl that i have on scsi zip...when i load it up it reads "disk read error"...someone had this issue before...they said that he connected his zip to pc, drug the files from the zip drive on to his pc harddrive, found the offending file, reformatted the disk, and put everything back on the zip disk...i believe this what occurred with my disk...i have external scsi zip parallel port...so i need this cable and drivers for my laptop so can recover my files...

By mpc3000 Sat Aug 06, 2005 11:58 am
" "disk read error"."

Connecting this to your computer would probably do little to help. Plus you may end up losing the MPC's formatting when copying to PC.

Last I checked, these SCSI-USB adapters are $80. That would be more than I charge to recover the disk itself.
By 4dahaterz Sat Aug 06, 2005 2:56 pm
mpc3000 wrote:" "disk read error"."

Connecting this to your computer would probably do little to help. Plus you may end up losing the MPC's formatting when copying to PC.

Last I checked, these SCSI-USB adapters are $80. That would be more than I charge to recover the disk itself.

they are only like $13.99 wit about $6.99 for shipping on Ebay
http://cgi.ebay.com/NEW-MICROTECH-DB25- ... dZViewItem

By mpc3000 Sat Aug 06, 2005 9:19 pm
"they are only like $13.99 wit about $6.99 for shipping on Ebay"

The good ones are $80 from Adaptec, the company that 'defines' SCSI and the one I use. I have not used the off-brand, that is why I did not reference them. Plus, that out company is out of business, has no support, and I have not been able to locate microtech drivers (in a non-password site). Thus, I cannot verify it works on Win2k, XP or OSX. The $80 model does.
By 4dahaterz Sun Aug 07, 2005 4:00 am
mpc3000 wrote:"they are only like $13.99 wit about $6.99 for shipping on Ebay"

The good ones are $80 from Adaptec, the company that 'defines' SCSI and the one I use. I have not used the off-brand, that is why I did not reference them. Plus, that out company is out of business, has no support, and I have not been able to locate microtech drivers (in a non-password site). Thus, I cannot verify it works on Win2k, XP or OSX. The $80 model does.

just like most things, they probably made by the same peeps that make the $80.00 one

By Doron Tue Jan 10, 2006 7:00 pm
mpc3000 wrote:" "disk read error"."

Connecting this to your computer would probably do little to help. Plus you may end up losing the MPC's formatting when copying to PC.

Last I checked, these SCSI-USB adapters are $80. That would be more than I charge to recover the disk itself.


...finally got the scsi to usb cable with adapter, however, when i connect my zip to my laptop it tells me me insert a disk...any answers :?:

By triplegreen Wed Jan 11, 2006 8:16 pm
There are programs that can recover data from corrupt drives, start here:http://www.pctools.com/ Also did you try putting the media in a different zip drive? Go to your local Fedex Kinkos, they still use zip drives in thier workstations.

By Doron Thu Jan 12, 2006 12:19 am
triplegreen wrote:There are programs that can recover data from corrupt drives, start here:http://www.pctools.com/ Also did you try putting the media in a different zip drive? Go to your local Fedex Kinkos, they still use zip drives in thier workstations.


...i'm going to check the site...as a matter fact, i'm going to kinkos in a minute...thanks...