strange gap appears in loop when midi is connected !!

A strange gap appears when my mpc (2000xl) is midi connected to my Vs-2400cd workstation. When I record or edit a sequence wile the midi is connected the mpc it wount repeat propperly.. so I Allways pull the cable out whenever doing so, are there any other ways to do this easier or an setting that need to be changed?

Help o broo out !! peace / Orazio Del Core

You possibly have either the MPC or the Roland set to sync to the other? On the MPC the slave/master settings are located under Shift+9 pages. Can't think any more specific at the moment.

Good luck.
-tank.

Ì set the mpc to midiclock and the vs24 to midiclock and adjusting the tempomap on th vs24 to the bpm value that I have on the mpc..

is there stil something I need to change?


/ OrazioDelCore

"it wount repeat propperly"

Are you trying to loop a sequence? While connected to a hard disk recorder? That would be problem #1.

Problem 2 is using midi clock. It works OK, but timing is horrible for recording. Try MTC.

Allright I`l try MTC instead!

Thanx alot really hope this is the answer to the problems



/ Orazio Del Core

I`ve set the midi settings to MTC both on the VS-2400cd & the mpc
it works fine now but there is still a problem... the sounds that are programmed from 01.01.00 won`t play back, it needs to return to the beginning point to playback the sounds from 01.01.00


help ! I need somebody Help !

Peace / oRAZIODELCORE