Technical questions for the MPC2000xl and the MPC2000
By rondiesel Fri Sep 23, 2005 3:01 pm
I'm not talking about kicks or bassdrums, i have plenty of those.
Anyone know how Pete Rock puts his basslines together or J Dilla (I'm assuming Dilla uses a keyboard setup, you can hear it in his new stuff), but where can you find some good acoustic, soul, electric bass samples that sit nice under the kicks without losing any flavor?
User avatar

By Paul R Fri Sep 23, 2005 3:19 pm
a synth/sound module?

i use a jv1080

By The Beat Conductor Fri Sep 23, 2005 4:45 pm
Getting a MicroKorg is a good idea, especially for basslines. Plus, you get all those other synthy sounds. :D

Multisampling is a good idea too. :wink:

By rondiesel Fri Sep 23, 2005 6:18 pm
Hmm i'll check into both of those...
what I was really curious about was if you guys draw the sampling line at drums or if you'll go into the crates for bass too...

maybe I should look into getting a sound module

i love kanye's bass as of late, does he use an asr-10?
User avatar

By Smoove03 Fri Sep 23, 2005 6:42 pm
try filtering samples
User avatar

By classic Fri Sep 23, 2005 7:12 pm
i make my own, i will sample low tones like rubber bands etc.. EQ them set sustain points and bam u got a banging bass sound. Almost all my bass is made by me....

class..

By rondiesel Sat Sep 24, 2005 2:32 am
Smoove03 wrote:try filtering samples


That's one of the reasons Im asking this question
I hate the way that sounds...I'll do it here and there but set it to another pad on 'note off' so that i can just make it come in at certain times. IMO beats with the sample filtered with no freq as the low end sound unprofessional. Beatminerz hooked it up back in the day but...still doesn't sound that great.

By rondiesel Sat Sep 24, 2005 2:33 am
Smoove03 wrote:try filtering samples


That's one of the reasons Im asking this question
I hate the way that sounds...I'll do it here and there but set it to another pad on 'note off' so that i can just make it come in at certain times. IMO beats with the sample filtered with no freq as the low end sound unprofessional. Beatminerz hooked it up back in the day but...still doesn't sound that great.

By Toecutter Sun Sep 25, 2005 6:01 am
Try sampling one shot samples, like one bass guitar pluck or a piano note..... but sample it with the bass turned up, then filter it down and you got a bass note. 16 levels it, and set the 16 levels to control tuning and viola!
User avatar

By a_real_mc Sun Sep 25, 2005 8:13 pm
You know those 808 bass sounds? These are good for bass lines. You filter them and then you get a real clean bass sound. Then raise or lower pitches to make it match your sample...
User avatar

By EMFinite Sun Sep 25, 2005 8:52 pm
i get mine from Fruity Loop presets. :)
User avatar

By Smoove03 Mon Sep 26, 2005 4:50 pm
i've heard mixed opinions about the bass station....is it really good?
User avatar

By jaem Mon Sep 26, 2005 5:22 pm
EMFinite wrote:i get mine from Fruity Loop presets. :)


I feel you son!!!!!!!

If its aint FL bass preset, it aint a bass!!!!!!!!!

By The Beat Conductor Mon Sep 26, 2005 8:15 pm
rondiesel wrote:what I was really curious about was if you guys draw the sampling line at drums or if you'll go into the crates for bass too...


It would take you a while to find a bassline that would match the beat you have already made. If I sample a bassline, I choose the rest of my samples based on that bassline. It's much easier to get a sound module such as the MicroKorg.