i already downloaded all the files on the site, but i don't even know how to the hell to try any of it out.
"rewrite os hold tap tempo..."
what the fck. this is nuts. ...someone finally programmed their own stuff for the 1000 and made it available?
--------another translation----------------------------------------------------
In beginning, it is necessary to rewrite OS in order to try to be able to start WP1000. First, MPC1000EX (mpc1000ex.bin) with downloading the software which is said from the download sight, when version raising OS of MPC, please rewrite with the same method. * As for the version rise method of OS this As for MPC1000EX OS which is downloaded from the home page of Akai (V1.07) rewriting part, it is something which adds the software which checks the CF card at binary code level. Those where it rewrites in function of main are just several bytes which do not have relationship, as for the cord/code of main that way being to be, completely there is no influence in the operation of MPC1000. Furthermore, rewriting, putting the CF card where the software of WP1000 was written, if you do not turn on power, it is the same as usual MPC1000. When the rewriting OS ends, WP1000 (wp1000.bos) downloading next, please copy in the route of the CF card. Inserting the CF card where wp1000.bos was written, when you turn on power, WP1000 starts. * The CF card where WP1000 enters is inserted and, while pushing the TAP TEMPO key, when you turn on power, OS of MPC1000 starts even to the cartridge. How to use The tune which converts CD to WAV in the CF card is inserted. Name of tune (file name) please make within 16 letters. (Even with 16 letters or more influence it is not in operation, but when to only 16 letters is not indicated to the picture) WP1000 is made to start next from the head, pushing the PROPELLANT-ACTUATED DEVICE BANK D key, it designates as the picture of Load, it loads the tune which is converted to WAV. When the load ends, pushing the PROPELLANT-ACTUATED DEVICE BANK A key, it returns to the picture of main, it selects the tune which would like re-to raise with ジョグ. After pushing the PLAY START key, when playback of tune starts, operating the slider and/or hitting the pad please play freely. (With default it is assigned in various ways in each pad) (the autoload) in the head "P01"? The tune which has gone in the folder where "P99" has been attached (the wav file) WP1000 the autoload does after the starting. Example of folder name: " P01_Song "and so on (within 16 letters) * Those where the autoload it does are only 1 folder. ("P01"? To select from midst "of P99", as for default "P01") Trial edition recommends that you use with the autoload. When (countdown 10 minutes you start) there is no folder which the autoload is done from after the autoload completing, from after the starting countdown 10 minutes starts. Basic operation (Change of picture) PROPELLANT-ACTUATED DEVICE BANK key (Selection of item) cursor key (Selection of value) ジョグ < DATA wheel > Value with each item is set (Control and scratch of pitch) with slider Q1 slider control of pitch (0? + 1 octave pitch rises) with the Q2 slider control of pitch (0? ? When 1 octave pitch goes down and) pushing the AFTER key of the Q2 slider having lit up as for the Q2 slider scratch playback (Playback) it plays back from beginning the PLAY START key tune. (Playback 2) the PLAY key it plays back from the position where it stops. (To reset) it advances fast forward quickly at BAR key 1 second interval, resets quickly. When (stop) liking to stop STOP key sound, this key is pushed. When (sound recording) the REC key recording, you use. (Execution of command) the function key (to correspond to key just above command, SAVE ･ CANCELLATION and the like) The popup window opening, when being some which can be selected, it lights up. When having lit up, when this key is pushed, the popup window opens.
-----------------------------------------------
