Problem Here, Help Needed!!!

I've loaded in my samples and programs via my APS file.
The sample memory shows that the files (wavs) have been loaded.

When I go to sequence mode, the pads make no sounds.

MIDI still works via the other modules I have ( I can hear their parts)
But all my MPC samples associated with the sequence do not play.

I've checked the volume settings, track mute, and every other thing I can think of...

Help.......

Step one after checking your trim screen to make sure that sounds are loaded return to the main screen and check to see if your MPC program is set to drum instead of midi. If this is not the case then the correct answer as follows. Go into your program screen and hit drum any one will suffice. The next screen you see hit drum again. this will put you in your assign program menu. Where it says program in the right corner whichever drum program you used or want to place your program under set it here. Now under that it will say new pgm A turn that to the right to select which program you want under that drum/program designation. follow these steps if you used more than one program.