INSUFFICIENT MEMORY

Need help....
what must i do to load samples now

maleachi wrote:Need help....
what must i do to load samples now

http://www.mpc-forums.com/viewtopic.php?t=26775




Has all the info you need.

did you upgrade your memory? or do you still have the original 16mb? if you still have the 16, then you need to upgrade.

i have a 256 Mb (Sandisk)
when i start the mpc he show's m e 16 mb installed

try reinstalling it..

if it still doesnt read it, get another 256 (kingston)

maleachi wrote:i have a 256 Mb (Sandisk)
when i start the mpc he show's m e 16 mb installed

it sounds like you don't have it installed the right way

tell me how to do it than.....

maleachi wrote:tell me how to do it than.....

watch my video on installing ram. look in my signature and click the link for videos. if you do have it in right then the ram chip may be bad.

maleachi wrote:i have a 256 Mb (Sandisk)
when i start the mpc he show's m e 16 mb installed

Seems like your talking about the Compact Flash card (Sandisk). Does it look like this?

This is only for saving and loading files into your MPC.
If you want to have more internal memory you have to install a memory expansion board. This can be installed behind the flap on the bottom of your MPC.

Also you might wanna read the manual, you can download a Dutch version here: http://www.akaipro.nl/bestanden/AKAI-MPC1000-nl.PDF

yeah....

maleachi wrote:yeah....

then you have to upgrade the RAM. the internal memory and the CF card are two different things and are used for two different reasons. the reason you are getting insufficient memory is because you are working with samples or pgms that exceed the 16mbs. look at the top of this section for a sticky called MPC1000 RAM and CF card Recommendations and read up on that.


that will solve your problem.