sending samples to multiple outputs

i tried to search the forums but i didn't have any luck finding the answer to this question:

is there any way of have samples sent to the main stereo outs as well as aux outs? i'm switching over from an mpc2000xl with the 8 out expansion and this was easy on that machine, you had separate level control for all of the outputs.

yo exil...
go to the mixer and press the pad you want to send out. Press the L/R Output or whatever and push the up arrow until you've highlighted the ST (stereo.) Change that to 12 then pan the pad to whicever side you are sending out. Repeat for all 4 outs.

The problem I have with this (sparq help please) is that none of my samples will ever pan to the right (if i wanted to send a pad to output 2.) You can only hear the sample if its pan to middle or to the left. Is that becasue the sample was recorded mono?

thanks,
mac

i don't know of any way to do what you asked on the 1k.

exilcomplix wrote:i tried to search the forums but i didn't have any luck finding the answer to this question:

is there any way of have samples sent to the main stereo outs as well as aux outs? i'm switching over from an mpc2000xl with the 8 out expansion and this was easy on that machine, you had separate level control for all of the outputs.

on the 1k, you choose to either leave it in the ST (main outs) or assign it to the assignable outs 1-4. NOT both.

Macalicious wrote:The problem I have with this (sparq help please) is that none of my samples will ever pan to the right (if i wanted to send a pad to output 2.) You can only hear the sample if its pan to middle or to the left. Is that becasue the sample was recorded mono?

thanks,
mac

if you assign the pad to either of the assignable outs (whether the sample is mono or stereo) it will have to be panned hard left (outs 1 or 3) or hard right (outs 2 or 4) if you leave the OUTs to "ST" then you can pan the sample either left or right and hear it either in the left monitor or the right monitor.

thanks you sir!

mac