mpc 1000 connect to stanton str8 80...how?

the built in preamp cords dont fit in the mpc 1000 but my dad has these cords that fit the mpc 1000 *sorry i dont know the name*

and i just got the turntable today and didnt get a mixer

*thought i could plug the headphones in...guess i gotta go back to the store nextime i got a day off*


anyways do i still buy a preamp and plug the rca cables into the preamp and plug the cables from the preamp into the mpc 1000?

or can i plug the mixer from the turntable into the 1000

i think u can use the digital out of the stanton into the mpc digital in...

they dont fit anywhere i tried to put em

if they are the same as the str8 100s which i believe they are they have a preamp built in to them...just switch it to line

Yeah but what he was asking about, is how do you fit the rca cables from the turntable into the mpc jack inputs.

Answer: you'll need a rca-to-jack converter (1/4" jack)

Megaton,
i got a str8-80 and a mpc 1k too,with no dj mixer.just take the yellow cable from the str8-80 and plug it into the digital in on the 1k.thats it.

pgm wrote:Megaton,
i got a str8-80 and a mpc 1k too,with no dj mixer.just take the yellow cable from the str8-80 and plug it into the digital in on the 1k.thats it.

Don't do that, use analog cables. The AD converter of the st8-80 sucks richard

pgm wrote:Megaton,
i got a str8-80 and a mpc 1k too,with no dj mixer.just take the yellow cable from the str8-80 and plug it into the digital in on the 1k.thats it.

i dont have a yellow cable i have a red cable and a white cable

aiight homie...at my school library they use stanton tr-08 i think thats what they are called..any ways...all u need a a rca (red and white) to 1/4''....plug the rca into the tables...and plug the 1/4" into ur MPC...and wollla...go to record and select analog, and u should have sound...should work man, because this table is a lower model than the one u got...

gettin my mixer and hopefully that adapter/cords tomorrow and im good to go turntable got a lot of features too *well for me anyway i dont need much*

reverse
pitch +/- 12%
line in to record off it
33/45/78

quartz lock?
key correction?

RadioShack can be a very fun place.

The Str-80 has a little switch under the platter that allows you to send a line level signal from the rca outs, thus enaling you to connect it directly to the audio inputs of your mpc-1000 without the need of a dj mixer.

didnt work for me
guess im gettin the mixer tomorrow

Go and buy a spidf cable at guitar center and connect it from the back of the turntable where it says digital output to the digital in of the mpc. simple as that. no mixer needed at all

my bad Mega,
i just had an extra rca around the crib and it was yellow...anyway just plug one end into the back of the str8-80 and the other end ti the mpc digital in..when you're in record mode scroll the data wheel until it says digital and you're good...OR..do like pt3r said and swith to line level under the platter on the turntable ,get some 1/4" adapters and plug into the mpc record ins...either way you dont need a mixer!

BTW pt3r, I owned this deck for like a year and never even knew that about the str8-80...i just tossed my manual in the box and stored it...damn good look fam!