By Tentends
Thu May 04, 2006 11:53 pm
Main out of the mixer in the record in of the mpc and the stereo out in one of the mixers imput ? will it mess up anything ?
By mnh2410
Fri May 05, 2006 12:31 am
Nope. Basically you are hooking up your mpc to the mixer and then u are also recording from your mixer when in the sample screen. Which MPC u have? Sounds like to me u might be tryin to re-sample.
By mnh2410
Fri May 05, 2006 1:41 am
Are u wanting to re-sample? If so u can do that on the XL if im not mistaken but read up on it in your manual.
By Mr modnaR
Fri May 05, 2006 6:48 am
if you don't have the mpc outs going into the mixer, but going to the monitors, then all will be well. but if the mpc's outs go to a mixer input and the mixer's main outs go to the mpc's record ins, you will get a feedback loop when in record mode. if your mixer has effects sends, use those to send signals to the mpc record ins. you then just turn up the send on the channel you would like to record from. doing it the second way i described also ties up the main outs, which is kinda strange because the whole point of a mixer is to mix the inputs down to the main outs so that you can play the sound on speakers, if that sound is going to the mpc, then you won't be able to hear it. of course i don't think you'd have it that way, but plugging the effect send into therecord ins on the mpc is a much easier way to work.
By pt3r
Fri May 05, 2006 10:46 am
mnh2410 wrote:Are u wanting to re-sample? If so u can do that on the XL if im not mistaken but read up on it in your manual.
The resampling function on the 2kxl is nothing but a bitrate conversion.
By Lampdog
Fri May 05, 2006 11:17 am
pt3r wrote:mnh2410 wrote:Are u wanting to re-sample? If so u can do that on the XL if im not mistaken but read up on it in your manual.
The resampling function on the 2kxl is nothing but a bitrate conversion.
Beat me to it again, I have GOT to get some of those pills.
Stop getting automatically offended when you see gold letters!
By Tentends
Fri May 05, 2006 11:43 pm
Thx Mr modnaR, you made alot of things in my head clear.
By the way its the tape out thats pluged to my amp thats why i was asking its just a lil mixer.
By the way its the tape out thats pluged to my amp thats why i was asking its just a lil mixer.
By Mr modnaR
Sat May 06, 2006 7:10 am
Tentends wrote:Thx Mr modnaR, you made alot of things in my head clear.
By the way its the tape out thats pluged to my amp thats why i was asking its just a lil mixer.
ahh i see. well whatever works works i spose, just be careful not to create loops in the signal path, and you should be fine. i definately recommend getting a mixer with effects send though, especially if you have a lot of outboard gear you want to sample, the method i suggested above is a very easy way to have things set up.
peace.