HELP OMFG

Hey,
its my first time updating any peices of equitment so i tried to install the os 1.1 on my mpc 2500 and um, i did everything and now its stuck on
MPC 2500 16MB ram installed

im preatty sure im retarted but i need help fast
lol
its bugging me out

Hook your MPC to your computer via USB. Make sure you have downloaded the new OS and have it unzipped and all that jive. Hit [MODE] plus LOAD and connect the MPC to your computer. Copy the OS .bin file and either drag it onto your compact flash card or "copy and paste" it to the CF card. Then, disconnect the MPC from the comp and then load the OS .bin file from the CF card. Follow the instructions and VIOLA!!! There you go! All you really had to do is read the OS update thread and follow those instructions!

by the way OS 1.2 is out now!

Just in case u are still confused about installing the operating system.

http://akaipro.com/documents/MPC2500/MP ... _Guide.pdf

If the MPC doesn't boot up properly after you turn it off, try holding the ERASE key while turning it on. This resets it to factory settings (manual p. 115). Then you can re-install a new OS like described.

its still doesnt boot up properly though,
it still just shows, MPC 2500 16 MB INSTALLED
lol

My friend had the exact same problem when we were trying to update his mpc2500. What had happend is that the OS was corrupt or got corrupted while being installed. He had to return it back to the store and it was shipped off back to AKAI. In exchange he was giving a new one.

uuuuuurrrrrrrrrggggggggghhhhhhhhh
ballz
lol

Someone posted up a good tip earlier, take out the CF card and palce the latest OS onto it with a card reader. Make sure it's in the root of the CF card, not hidden in a folder

THen put it back into your MPC and turn it on whilst holding the window button, it should then ask if you want to update the OS

awwwwww
spirez
i owe u so much man
that def worked
thnx dude

No problem, would you mind doing me a favour please?

Check my thread a about the looping problem i'm having.

All you need to do is set loop to off in the main page, begin recording a sequence and see whether it stops after 2 bars or not.

Cheers

yup did it
na
it records just fine man