midi connection issue

I am having a issue with my mpc telling my zoom streetbox what noteas to play. I can not get it to do any program / kit changes. I have read both manuals several times but i must be missing something. I am currently in the step edit screen trying to change the program info there but to no avail. Any help suggestions greatfully appreciated.

i read that but i have no clue what this means

First found out what the MSB ID is on this board ,it should be between 0-127. Let me give an example.

Lets say I have a Proteus 2000 w/mo-phat chip in it. If I want to demo a sound usely in the edit mode it will show Pan,volume,name of the instrument,and MSB-number/LSB-Bank number.
Proteus 2000 might have user's banks 0-4 /ID or MSB would be 08 and LSB-Banks would be 0-4. Now that's the user's banks.
Proteus 2000 Program Banks ,MSB might be 04 and however many program banks it has depends-like let's say it has 1-7 banks ,then LSB-0 would be turned to 1-7.

im trying to fins the zoom manual online so i can post the 1 paragraph it gives you on how to sync it and play with an external midi device. Basically i have everything set right because i can hear sounds from the zoom when i hit the mpc i just cant change the sounds.

maybe this will help someone help me i found this in the book

Cnh PP program change midi channel number 0000-1111

MIDI Implementation
1. Recognized Messages
Status 1st 2nd Description
-----------------------------------------------------------------------------------
8nH kk vv Note Off kk: note number (See Note 1)
vv: velocity will be ignored
9nH kk 00H Note Off kk: note number (See Note 1)
9nH kk vv Note On kk: note number
vv: velocity
BnH 07H vv Channel Volume vv: volume value
BnH 11H vv Channel Expression vv: expression value
BnH 78H xx All Sounds Off
BnH 7BH xx All Notes Off
CnH pp Program Change pp: program number (See Note 2)
F2H sl sh Song Position Pointer shsl: song position (See Note 3)
F3H ss Song Select ss: song number 0-98
F8H Timing Clock
FAH Start
FBH Continue
FCH Stop
NOTE: n = MIDI Channel Number ( 0000 - 1111 )
1. Note Off Messages is recognized but will be ignored.
2. Relationship between Program Numbers and Kit Numbers are assigned as
"Kits List" attached.
3. SongPositionPointer for a pattern, new location is wrapped around
the bar length of the pattern.
4. Note On messages can be recorded into a pattern.
2. Transmitted Messages
NONE.
3. System Exclusive Messages
No SysEx messages are recognized/transmitted.
Reference
MIDI Implementation Chart

Transmitted Recognized Remarks
Function ...
Basic Default 1-16 Memorized
Channel Changed 1-16
Default 3
Mode Messages
Altered ******************
Note 0-127
Number True voice ******************
Velocity Note ON o
Note OFF x
After Key's x
Touch Ch's x
Pitch Bend x
7 Volume
Control 11 Expression
Change
120 All Sounds Off
Prog o 0-127
Change True # ******************
System Exclusive x
System Song Pos o
Song Sel o
Common Tune x
System Clock o
Real Time Commands o
Aux Local ON/OFF x
All Notes OFF o
Mes- Active Sense x
sages Reset x
Notes No messages will be transmitted.
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO o : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No

Glad I can help you sonic!

THANK YOU DJ T this man took a hour of his time to call me up and walk me through this all i got to say is thank you alot.

SonicLabsAudio wrote:THANK YOU DJ T this man took a hour of his time to call me up and walk me through this all i got to say is thank you alot.

Ok enough praise, now I want to hear some Phat tracks!!!! have fun partna and share the love. 1

hi i only got my mpc1000 the other day and im haviing simular problems...every pad plays a midi note, and i dont know how to turn iduvidual pads on and off..ie so its only midi or only audio

what's your setup,and what R u trying to do?

here we go again lol

firstly, thanks for the time.

i've got an mpc1000 and a novation nova synth. i want to control the nova with the 1k. when i make a midi connection tho, all the pads play midi notes, where as i just want one pad for each midi note and one pad for audio samples.

bump*

hope you got that that worked out.