((((Error at 0000:BDF7))))) Answered for all

If you have the mpc2000 and not the mpc2000xl then this will not work because for the 2000 you have to load the os on start.

1. Start mpc without anything in your respective drive ie zip or floppy
2. go to the load screen still without anything inserted
3. now go to the part that says atapi(ie internal zip)
4. move it up to scsi one or two doesnt really matter
5. put in your disk
6. then scroll back to atapi
7 and it should work

here is another thing that you can try

This is another way that I use whenever that error comes across the screen.
1. Load the mpc without anything in it.
2. Let your mpc go pass load memory portion so that it doesnt read a disk.
3. After the memory check/load has been completed put your disk in
4. dont go to load or anything, just let the mpc sit in this state for a little bit

and i dont mean let it sit for like two minutes
go use the computer or watch tv or something for 10-20 minutes
5. now go to the load screen and it should be all good

Here is another step for those that have a sound module
1. follow 1-3 from the above directions
2. now still in direction three, start to make a beat
3. do what you would normally do when making a beat with your module
4. And after you have finished making your drums go to the save screen and save
5. then continue working on you beat and it should be all good

remember this will not work with samples form your zip because you cant load or save yet.
____________