Post your views and questions about the Akai MPC2500
By Siver Tue Aug 01, 2006 6:40 am
I just spent all my money on a 2500 and I'm broke now. Is there anyway for me to export my beats without me having to buy anymore hardware? Is the only way for me to get a beat onto my PC is if I were to track it out using an audio interface? My laptop only has a mic input and as of now I can't buy any audio interface. Does this mean my songs are stuck in my MPC until I can come up with some cash?
User avatar

By episode Tue Aug 01, 2006 7:09 am
Your computer's mobo should have a line input along with a mic input as you mentioned. But if it doesn't I guess the mic input will have to work for now. You need 1/4" stereo plugs to 3.5mm (the size of a mini headphone) jack, and of course a program to record audio. Try audacity, it's free.

http://audacity.sourceforge.net/

By Siver Tue Aug 01, 2006 7:14 am
ah i shall sleep alittle better now knowing that...a few dollar cable i can afford...do you think the quality will become really bad if i plug it into the mic input?
User avatar

By episode Tue Aug 01, 2006 7:23 am
Siver wrote:ah i shall sleep alittle better now knowing that...a few dollar cable i can afford...do you think the quality will become really bad if i plug it into the mic input?
I wouldn't be better than the the line input, but if you're strapped for cash then you have no choice, right? You should have a line input on your motherboard. It's the BLUE input jack; here is a picture of a mobo with some typical ports:

Image

see the line in near the top right? look for that on the back of your computer.

By Siver Tue Aug 01, 2006 7:26 am
na just a mic input

do they even make a 1/4" stereo plugs to 3.5mm cable? a
Last edited by Siver on Tue Aug 01, 2006 7:30 am, edited 2 times in total.
User avatar

By episode Tue Aug 01, 2006 7:28 am
Siver wrote:na just a mic input

do they even make a 1/4" stereo plugs to 3.5mm cable?
They exist, but not all places have them. It's easy to get adapters/converters though.

By pb-sh Tue Aug 01, 2006 7:30 am
episode wrote:
Siver wrote:ah i shall sleep alittle better now knowing that...a few dollar cable i can afford...do you think the quality will become really bad if i plug it into the mic input?
I wouldn't be better than the the line input, but if you're strapped for cash then you have no choice, right? You should have a line input on your motherboard. It's the BLUE input jack; here is a picture of a mobo with some typical ports:

Image

see the line in near the top right? look for that on the back of your computer.


He's using a laptop...

By Siver Tue Aug 01, 2006 7:31 am
so as far as the audio interface goes, what should i be looking for? i just need something that will get the job done (don't need anythign fancy) and will work with my laptop

By Siver Tue Aug 01, 2006 7:42 am
if you do have Line In on you soundcard, does that mean you would not need an audio interface?
User avatar

By Rex Mundi Tue Aug 01, 2006 7:49 am
if ya can afford a bit more, get a USB soundcard, like the behringer uca202

plugs straight into your USB, has 2 line ins and 2 line outs............. with quality sound..............the jus use the outs of ya mpc into that baby and ur record into you laptop with a decent quality, plus play back will be better hence the outs on the soundcard

its bout 25 pound so around 50 dollars if ur a yank

By _Stilo_ Tue Aug 01, 2006 7:54 am
Siver wrote:if you do have Line In on you soundcard, does that mean you would not need an audio interface?

Unless you need more than 1 (stereo) channel input, no. The quality of those onboard soundchips isn't always the best however.

An USB soundcard is a good idea. The 2 line ins on the Behringer Rex mentioned are only mono however. It's just like a simple external soundcard. A PCMCIA Soundblaster card would do as well for a laptop, is a little more expensive, but has more features as well.


But anyway, you can always resample the main outs on your MPC, save that as a WAV file and copy it to your computer. No connection or audio interface needed at all.

By Siver Tue Aug 01, 2006 11:01 am
But anyway, you can always resample the main outs on your MPC, save that as a WAV file and copy it to your computer. No connection or audio interface needed at all.


how do you do that? and that will really work?
User avatar

By episode Tue Aug 01, 2006 11:19 am
Siver wrote:
how do you do that? and that will really work?
Yes, it works. page 55 of your manual.

By _Stilo_ Tue Aug 01, 2006 1:02 pm
Siver wrote:and that will really work?

:lol:

Yes man, believe it....believe it....