Nino304 wrote:So would the camcor work on the 60 as well?
-uno-
This from memory is the same SCSI card reader that ELMACACO uses with his 60. ( Is this correct ELMACACO
)
It's certainly appears to be the same model I and others have talked about as working in this forum before:
http://www.mpc-forums.com/viewtopic.php ... c&start=15
Tested to work with.
MPC3000/MPC3000LE.
MPC2000.
MPC2000XL.
All S series models from S2000 through to S6000.
All Z series models.
ASR10R/ASR10
EPS16+ with SCSI option.
PC's with various SCSI cards.
MAC's with SCSI.
In my experience the PCD-25 ( that is inside this CASE ) is possibly the best SCM/MICROTECH model made.
Of all the SCSI card readers I have tested; this is the only model that appears to work well with the old and new SCSI bus command set and bus timing/transaction cycle methods.
Compatability SCSI bus testing with sophisticated ANALYZER equipment confirms this to be the case also.
Rohan.


