sync pro tools problem

New to the MPC production world? Got a music production question that's not really specific to any particular MPC? Try your luck here and get help from our experienced members.
 Reply Share on Facebook

By cooocooo1 Thu Sep 21, 2006 2:06 am
YOUR PROBLEM IS NOT A "SYNC" PROBLEM!!!!

what good is havin everything synced if you cant record anything?

By cooocooo1 Thu Sep 21, 2006 2:08 am
and lajprod already told you how to sync everything up....DAMNITMAN!!!!

but here it is again for the slow people...

Click on the MIDI tab in PT> click on MIDI Beat Clock> check Enable MIDI Beat Clock for... > check the appropriate midi device> click OK> click on the Setups tab> Peripherals> Machine Control> check Enable and select the correct midi device> click OK

On the MPC press SHIFT/9(MIDI/SYNC)> select the input you have the midi cable from the midi device connected to(1 or 2)> switch Mode: to MIDI CLOCK> switch Receive MMC: to ON

Make sure to set the tempo in PT to the same tempo as the sequence in the MPC.

By Mpc-feen Thu Sep 21, 2006 2:41 am
switch Mode: to MIDI CLOCK> switch Receive MMC: to ON
.....swith mode on the mpc? to midi clock? that might be it could u explain that a lil more

By cooocooo1 Thu Sep 21, 2006 2:46 am
youre gonna have to get the new 1k os for the mmc but I really dont think you need it unless you wanna send mmc from the mpc which you dont wanna do and again....


THIS IS NOT GONNA HELP YOU RECORD AUDIO!!!!!
User avatar

By LaJProd Thu Sep 21, 2006 5:21 am
This whole thread is makin my eyes hurt!!!!
User avatar

By LaJProd Thu Sep 21, 2006 5:25 am
LaJProd wrote:Did you assign the PT tracks to the correct mic line to which your mpc outs are going?
User avatar

By krang Thu Sep 21, 2006 6:18 am
Mpc-feen wrote:u can suck a fatty if u think im gonna stop usin my mpc..im probly makin better beats in 2 weeks then u in 2 months.....NE WAY i follwed the manula instructions..i tryed makin the MPC the master and the salve and its just not workin like i said a straight line..


U probably have the time to make more beats. But i doubt better. Just keep reading the "manula" instructions. That will "salve" the problem.
User avatar

By jaem Thu Sep 21, 2006 3:31 pm
Image

By Mpc-feen Fri Sep 22, 2006 1:09 am
aight i asked u guys a simple question...if ur gonna be fags about it then u have no life goin on forums tryin to make people feel bad....get life...but im still havin the SAMEproblem so if ne of u retard PROS know gimme a hint
User avatar

By krang Fri Sep 22, 2006 1:53 am
Mpc-feen wrote:if ne of u retard PROS know gimme a hint


I am going to explain how to do this the best i can. Even though i am a pro - i am still retarded. salvo manula douchewipe protooolz aruba in New yurk city. The regerler audio frrom midi cast has a mask. I like jello. Thank you bye bye bye now
User avatar

By LaJProd Fri Sep 22, 2006 2:07 am
Mpc-feen wrote:aight i asked u guys a simple question...if ur gonna be fags about it then u have no life goin on forums tryin to make people feel bad....get life...but im still havin the SAMEproblem so if ne of u retard PROS know gimme a hint


You never told us if you tried everything that we have explained....Like, and I quote....
LaJProd wrote:Did you assign the PT tracks to the correct mic line to which your mpc outs are going?

By Mpc-feen Sun Sep 24, 2006 7:36 pm
i got the usb fast track pro.... would that be a bus 1 or 2? or is it mono 1,2

By cooocooo1 Sun Sep 24, 2006 7:59 pm
ya killin me smalls.....

check your pm's
User avatar

By sinister_keys Mon Sep 25, 2006 4:00 pm
juxt wrote:
Mpc-feen wrote:if ne of u retard PROS know gimme a hint


I am going to explain how to do this the best i can. Even though i am a pro - i am still retarded. salvo manula douchewipe protooolz aruba in New yurk city. The regerler audio frrom midi cast has a mask. I like jello. Thank you bye bye bye now


^^^lmmfao .. damn now thas ish made me crack da phuck up :lol:

By eswerve Mon Sep 25, 2006 4:37 pm
which hardware piece are you using for protools? The Mbox? Mbox2? Digi001/2/r? Protools M-powered? Did you get a "street" copy of protools that didn't come with the hardware? I mean like everyone has been saying, do you have your audio outs from the mpc connected to the audio ins of your PT hardware? I mean I haven't been recording with the mpc for that long, but you gotta get the sounds in PT somehow, via your outs on the mpc. I'm just a retard that looks for the obvious.
 Reply
Return to Getting Started With MPCs