PCD25 cardreaders for sale

found a few.
Had to buy all of 'em.
the're brand new, still boxed and sealed.
works like a charm, both internally and externally

they cost me 100 euro a piece, lettin them go fot the same, shipping costs for buyer.

I live in Amsterdam....

mail [email protected]

Dayum I can post on forums through my mobile dope!

Back to the drives though, I'm interested in 4 maybe 5 drives. Do they come with all cables to connect to 60's and 3K's? Mine are UK voltage MPC's will this affect the drives if I install them intermally? Can u send me or post up some pics of them?

Just to clarify though: I would want to install them internally, do they have all fittings, screws cables etc. to do this?

Cheers
And

it's EXACTLY the drive on MPC3000.com



only it's a microtech branded one....
works like a charm

Have u tried them with a MPC3000le?

Avastyle wrote:Have u tried them with a MPC3000le?

PCD-25 drives work with MPC3000/MPC3000LE machines ...

Read my previous threads discussing this very issue.

Thanks,

Rohan.

OK, great... sorry thought it was another brand etc...
Thanx!

what about installing internally in the 60?

I assume you need the SCSI upgrade to do it

the average man wrote:what about installing internally in the 60?

I assume you need the SCSI upgrade to do it

You will need a MARION SYSTEMS SCSI board for any SCSI communication to be realised on an MPC60/MPC60MK2 ... ( ASQ10 also ).

Rohan.

I should've phrased that better! I knew the SCSI was a necessity, but what I was trying to get at was wether it could be installed internally?

Has anyone managed to fit a multi card reader internally into their 60?

you can hook it up eternally just like any device.
I don't recommend it though except when you do intensive travelling.

you'll need an internal exernal scsi convertor, male>male gender changer and ribbon cable.

you can find all the info here : http://www.mpc3000.com/zip_install.htm
(thanks to mike goins)

a cardreder would be connected just like the internal zip
only zip sucks.

will these work with the asr 10?

i am workin on puttin one inside a 60 I
ill let you know when i get that completed

these drives work fine with the ASR10 and for that matter with all samplers I tried it on.

I'd buy one but you're taxing man, that seems real expensive to my broke ass...I'll trade you for some drum kits? haha

can i purchase one let me know.... i got a 3000...... and i'm bout to max'em out... trying to get em right....... let me know


[email protected]

sac,ca

-Bubb-