
By starmanwarz
Tue Oct 31, 2006 6:08 pm
I am about to get the SEAGATE ST96812A HDD 60GB,but I noticed that it is ULTRA ATA/100 instead of ATA/100.Will I have any problem with that?



distortedtekno wrote:Buy the Kingston Ram (mentioned in the other thread), so you can have the ability to load more samples, projects, etc.
COST: Around $30-$40.
To store all your samples, projects, etc., you need a CF card or a hard drive. The MPC1000 uses a laptop hard drive and the HDM10 hard drive adaptor. Buy the recommended hard drives tested by Akai, or any laptop hard drive that's reported to work in this thread. After that, you'll have more than enough storage space.
COST: Anywhere from $74-$100 (or higher, depending on storage capacity)
The HDM10 can be found at VST for $25 + shipping.
http://1226354.estore.networksolutionsdesign.com/Detail.bok?no=30

junky limbo wrote:Now a hard disc that is NOT compatible:
Fujitsu MHT2030AT.
The disc stems from my iBook G4 1200 which logic board I destroyed. I guess you have got to stick to PC drives - at least I ordered one now...

allergic2life wrote:distortedtekno wrote:Buy the Kingston Ram (mentioned in the other thread), so you can have the ability to load more samples, projects, etc.
COST: Around $30-$40.
To store all your samples, projects, etc., you need a CF card or a hard drive. The MPC1000 uses a laptop hard drive and the HDM10 hard drive adaptor. Buy the recommended hard drives tested by Akai, or any laptop hard drive that's reported to work in this thread. After that, you'll have more than enough storage space.
COST: Anywhere from $74-$100 (or higher, depending on storage capacity)
The HDM10 can be found at VST for $25 + shipping.
http://1226354.estore.networksolutionsdesign.com/Detail.bok?no=30
wheres a good site to order the Kingston Ram from?