By Shy-Guy
Mon Mar 26, 2007 8:22 pm
How do you do it peeps, ive had alook around and cant see nothing...
Page 101 of the AKAI MPC1000 manual.
Initialize to Factory Preset
By distortedtekno
Mon Mar 26, 2007 8:26 pm
Last edited by distortedtekno on Mon Mar 26, 2007 8:29 pm, edited 1 time in total.
By distortedtekno
Mon Mar 26, 2007 8:32 pm
Find a way to put the OS on a CF card. This is why I suggest buying a cheap USB CF reader incase of an emergency.
By distortedtekno
Mon Mar 26, 2007 8:41 pm
cool, you're all set.
now you see why i never install an OS from the internal hard drive and do it the old school way instead.
now you see why i never install an OS from the internal hard drive and do it the old school way instead.
By Mr modnaR
Mon Mar 26, 2007 9:19 pm
do you not do it from the load screen then? i've always done it that way, and it's always worked.
By distortedtekno
Mon Mar 26, 2007 9:25 pm
Mr modnaR wrote:do you not do it from the load screen then? i've always done it that way, and it's always worked.
Modnar, he originally got in a mess with the corrupted download of 4.50A, so there was no choice for him but to install 4.51 using the CF card to remedy the problem.
Shy-Guy - Check your PM.
By Mr modnaR
Mon Mar 26, 2007 9:49 pm
yes, i see that, i was asking if you did it that way, and, if so, why? obviously, for emergencies, the cf card method is fine, but every time i've installed a new os the other method worked fine for me.
By distortedtekno
Mon Mar 26, 2007 11:01 pm
I've been aware of installing the OS from the load screen for a while, and I've done it before without a problem. But I'm so used to installing with the CF card that I continue to use this old method out of habit.