By jR.H-E-A
Fri May 04, 2007 9:57 pm
how can i recover it? some one know? 
holla please=)
holla please=)
By Sanova
Sat May 05, 2007 3:38 am
dopedee wrote:what do you mean? Im not sure what your asking
Same, i think thats why no one has responded.
Did you get jacked and you're tryna recover it from the thief?
Lost it in a poker match?
It got injured playing basketball and needs to recover?
It has crashed and you don't know what to do nexT?
By thedvs01
Sat May 05, 2007 3:59 am
He/she probably means restore to factory defaults
Isn't that hold ERASE as you power it up?
Isn't that hold ERASE as you power it up?
By rinseout
Sat May 05, 2007 8:30 am
i think i he lossk for a new cover for his mpc, right?
If so take a look here: http://www.mpc-forums.com/viewtopic.php?t=73139
If so take a look here: http://www.mpc-forums.com/viewtopic.php?t=73139
By jR.H-E-A
Sat May 05, 2007 12:44 pm
My mpc1000 was used before i got it. so i cant do what the manual says cuz. the "start setups" is not original.
please holla back!=))
please holla back!=))
By thedvs01
Mon May 07, 2007 6:52 pm
jR.H-E-A wrote:My mpc1000 was used before i got it. so i cant do what the manual says cuz. the "start setups" is not original.
please holla back!=))
www.akaipro.com
Download the factory sound set for the 1000, put it in a folder on the CF card, and load it all at once when you turn on the MPC. Then you can folllow the manual.
If you want to do it right, you need to write them to the internal memory, but this is more trouble than its worth as the sounds suck, and once you know how to use the MPC you probably won't ever use them again.