By pt3r
Fri May 18, 2007 6:55 pm
Aight good luck I'd say, the howto is posted somewhere on this forum. Not for the faint of heart, or the one with shaky hands LOL
Lampdog wrote:The system software for the MPC2000 has been upgraded to V1.72 to add support for the following improvements and fixes:
Improvements:
[DISK]
1. The note duration may be altered when SMF data is loaded - fixed.
2. The time signature may be altered when SMF data is loaded - fixed.
3. The 64th track may be lost when all 64-track sequence is saved and loaded - fixed.
4. Garbage data is displayed when FLASH is selected while Flash-ROM is not installed - fixed.
5. “Can’t find file . . . [SKIP]” message appears when the program is loaded with sound that exceeds the internal memory capacity - fixed.
[SONG]
After converting song to a sequence, the subsequent operation makes lock up if the convert destination sequence has been used in a song - fixed.
[MAIN SCREEN]
1. Incorrect Tempo is sometimes shown - fixed.
2. Copy Parameters of Sequence revives some deleted sequences - fixed.
3. Recording sequence records pad action while in stop mode when Count is set to OFF - fixed.
4. SHIFT TIMING affects non-selected tracks - fixed.
[MIDI]
Note Repeat functions on a wrong MIDI channel when MIDI keyboard is used - fixed.
[SYNC]
1. It now waits for 50 seconds (used to be 1 second) for MIDI Clock to come in after Start Command is received in MIDI Clock Slave mode.
2. In MIDI Clock Master mode, PLAY START may not start the slave units (depending on the unit) from the beginning - fixed.
[PROGRAM]
Velocity setting in Velocity field of Velocity Modulation Window not reflected - fixed.
[TRIM]
Invalid loop length could be set sometimes - fixed.
Some interesting bugs there Lamp.
Anything else I should keep my eyes peeled for?
Peace
