mapping a sound across a asr-10

yea i wanna take a bass line that i have a map it across the keys of the asr can anyone tell how to do this?

butcher knows I think PM him.

The on-line manual for the ASR 10 is here:

http://www.emu.com/support/files/storag ... manual.zip

Your answer is somewhere there. I read about it before.

here it is. straight from someone at the asr forum.

yeah, first plan out what keys you want each sample to play on.

select your original wavesample.

press edit/pitch and scroll to ws range. press the keys for the range of the 1st sample.
edit/wave and set the start & end points for the 1st sample.

cmd/wave-->copy wavesample to the same instrument & layer.
(like stated above use the "params only" option of you're only going
to change the start & end points. this will save memory.)

with the new wavesample selected,
press edit/pitch and scroll to ws range. press the keys for the range of the 2nd sample.
edit/wave and set the start & end points for the 2nd sample.

cmd/wave-->copy wavesample to the same instrument & layer.

with the new wavesample selected,
press edit/pitch and scroll to ws range. press the keys for the range of the 3rd sample.
edit/wave and set the start & end points for the 3rd sample.


any other questions and go here. they will be more helpful than a mpc forum. http://s87125964.onlinehome.us/forum/index.php?act=idx

okay, thanks for that but i was talking about a bassline that i have in the mpc. i wanna map that across the asr-10 so i can play it better

Wouldn't you just sample the MPC with your ASR and then follow the directions above

Maybe he wants to use auto-chromatic on the mpc and then trigger the multi samples with keys on the ASR? But I bet it would sound better to do it Butchers way and just sequence on the MPC...

i figured out how to do what i was talkin bout and my mpc is the sequencer but how can i play the notes on the asr in mono, not poly?