Cant sync Mpc 2500 with fantom x6

DOES ANYONE KNOW HOW TO SYNC THE MPC 2500 WITH A FANTOM X6. IM LOST, CAN SOMEONE PLEAS HELP??!!!

midi out of the keyboard to the midi in of the mpc. and the midi out of the mpc into the midi in of the keyboard.

THATS ALL THERE IS TO IT?

daevilg wrote:THATS ALL THERE IS TO IT?

MPC Settings:
Press Mode and Pad 9
Midi Tab
Active track recieve channel:ALL
Sequence change by program change: OFF
Pad to internal sound :ON
SYNC Tab:
Sync IN:OFF
Sync Out:OFF
Fantom Settings:
Press Menu
Select System
Select Midi
Device ID-17
Performance Control Channel 16
Keyboard Patch RX/TX Channel 1
Pad Patch RX/TX Channel 10
Transmit
Transmit program Change On
Transmit Bank Select: On
Transmit Active Sensing: On
Transmit Edit Data: Off
Soft Through: Off
Recieve:
Remote Keyboard Swith: Off
Let me know if this helps.

OK, I DID IT LIKE HOW U SAID. ITS SYCS ON TIME FOR THE 1ST 8 BARS. AFTER THE 1ST 8 BARS THE MPC FALLS OFF OF SYNC

why not use the 2500 as your main sequencer?

elliz wrote:why not use the 2500 as your main sequencer?

Exactly

The info I provided was to setup the MPC and the master and the Fantom as the slave. So disregard if that is not the way you want to work.

ok, I set it up just how u said it, when i press play on the mpc the fantom doesnt do anything,....nothin.

It will not do anything unless you construct a sequence.
First ensure that the Midi out A in connected to the midi in of the Fantom.
Second ensure that the out of the fantom is connected to the midi in 1.
I won't spoon feed you the rest. You should be able to figure the rest out. Read The Manual

does the fantom need to be in to sequencer mode or anyfing?

Memphlow you the man...

blessed for the help!!

1 iLL ThoughT