Share your knowledge on these two classic MPCs
User avatar
By Swift Ikarus Wed Sep 12, 2007 3:17 pm
I found alot of places selling 1 mb dd/ds disks... would those be ok for teh mpc60 ?? on the FAQ link.. none of the links work anymore about the 720k disks...

http://www.cleansweepsupply.com/pages/i ... 12882.html

it has 2hd in the picture but i emailed them as well as imation.. and they both said its dd/ just like in the description but its 1mb.... so im confused.. heh


i know it formats to 720k anyways... but i guess as long as its DD/DS and not HD..... it wont ruin the drive over time im guessing???

By distantb Wed Sep 12, 2007 6:35 pm
it wont ruin the drive using hd disks , it just means the disk is able to be writen two on both sides of the disk. The mpc60 only reads one side and it will just use one of the two. Wont do any harm to the drive.
User avatar

By 7 1 4 Beats Wed Sep 12, 2007 7:53 pm
Everybody and their mama on here says they swear it ruins the drive to use HD disk but I never had any problems.

By csmealer Thu Sep 13, 2007 1:18 pm
Personally, I've been using DS/DD. I found a lot of 43 unused discs on ebay for $10+$10 shipping, and also got about 15 at work for free. You can probably find a similar price on ebay. But according to the FAQ on Linn's site, the other posts are correct--you can use HDs w/o problems:

QUOTE:

Q: I find it difficult to find low density floppy disks for the MPC60. Can I use High Density disks?
A: The correct floppy disks to use in the MPC60 are double sided, double density (DS/DD). These disks are difficult to find because of the greater popularity of high-density disks (HD). If you canÌt find any DS/DD disks, you may use HD disks instead.

NOTE: If you take an HD floppy that has been formatted in the MPC60 and try to read it in an MPC3000, the MPC3000 will tell you that the disk is bad or not formatted. If this happens, simply cover the HD hole in the lower right corner of the disk with opaque tape. (This hole is located on the same edge of the disk as the "HD" emblem, and unlike the other "write protect" hole, has no sliding window.) This will trick the MPC3000 into thinking that the floppy is a DS/DD disk and will then be able to read it.

END QUOTE
User avatar

By Swift Ikarus Thu Sep 13, 2007 6:10 pm
yea i just bought a 100 made by imation.... for 50 bucks... 50 cents a disk isnt that bad i guess....

and i think the 1mb are the same as 720k.. since all the listings of them list both sizes as "720k/1mb" so you just can format accordingly i guess.... but they are ds/dd as well....