OS 4.86 is out.

Forum to discuss all matters relating to the MPC1000 and MPC2500 operating systems created by 'JJ' (all versions).
 Reply Share on Facebook

OS 4.86 is out.

By Seung Sat Sep 29, 2007 7:25 am
http://www7a.biglobe.ne.jp/%7Empc1000/

---------------------------------------
Bug fixes & Change: Ver4.86 29-Sep-2007
---------------------------------------
1. [GROBAL EDIT]
　1.Cursor on sample select.
　2.PAD on + Jog turn.
　BANK A: good.
　BANK B,C,D: dose not work.

2. [GRID]
　1.[SHIFT]+[TAP TEMPO]==> disply "Swing:xx Shift:xx"。
　2.[Shift]+[Up arrow key] A dispay is strange.

3. [SAVE]
　[A PROGRAM]
　Replace same samples:YES
　Although the sample name is assigned to the program,
　when a sample does not exist.
　The sample in a disk will be deleted.

< Change >
The name of OS was changed into "JJ OS" from "NEW OS".
User avatar

By CommanderRobot Sat Sep 29, 2007 8:39 am
it's officially called jj os now!
User avatar

By m:t:c Sat Sep 29, 2007 9:45 am
yay, firin' it up asap.
User avatar

By hereo Sat Sep 29, 2007 6:05 pm
The Jeanius makes it official! I'm bout to load it up right now!
User avatar

By CommanderRobot Sun Sep 30, 2007 9:41 am
there is still a problem with recorded samples on muted tracks. in v4.85, he changed this bug:

[MAIN]
[TRACK MUTE ON]
[Program Play:MONO]
PAD hit sounds is muted by the recorded note events on the muted track

i had some serious problem with this, because it rendered some of my sequences unusable.

but now after overworking it, i found the same problem with "mute target" samples.
1. set 2 samples to mute target
2. record one of them
3. mute this track
4. play the other sample.
bug: sample gets cut-off by 'mute target'-sample on muted track.

i just reported it, but feel free to check it and report, too.

By 1waymuzik Sun Sep 30, 2007 7:10 pm
Word up! Sometimes that is useful because I've had some of my older programs load up with missing samples and the text will remain so I'll know what and where to load up the sample from my card. I think I'll pass on this one for now
User avatar

By mikolo Mon Oct 01, 2007 1:37 pm
Word up! Sometimes that is useful because I've had some of my older programs load up with missing samples and the text will remain so I'll know what and where to load up the sample from my card. I think I'll pass on this one for now


I haven't used 4.86 yet, but the missing samples should still appear (say if you load the program without samples). What i think JJ has corrected was a saving issue. In 4.85 if you made a new program by using an old one as a template and saved the program with new samples , any remaining missing ?samples(i.e not in RAM but referenced in the program) would delete the actual samples off the card/HD.
 Reply
Return to MPC1000/2500 JJ OS