Rookie to Protools need help,not getting answers help please

Ok this is my set up(protools Le 7, Dididesign 002 mixer, mpc2000xl, and roland fantom x6. I make all my beats through the fantom and the mpc is my main tool so I have it sync to the 002 mixer with protools. I just want to take my seq I made in the mpc and put it into protools. everthing is connected right and protools does play the seq when I press play but how to I track all the tracks in as a seq all on there own tracks?????? It might be my setup on protools im not sure but I know someone could help me out or give me a link about this information!!!!!

Did you go to your mixer on the MPC and set the sounds to come out of whatever outs you want them to play out of?

No but I thought something was with that but once I do that what would I have to do?

You have to change the numbers in the mixer settings to match the sounds on your pads to which outs you want it to go to. SO got to mixer window and at the top where the hyphen is highlight that part and turn the jog wheel and it should change to some numbers. Those are the outs so now change the the numbers to the pads you want to go out of what outs.

when in the mixer screen and after you have assigned inv outs don't forget to press down arrow and turn the volume up with the jog wheel on each inv out, otherwise nothing will sound when you are recording. I found this out by trial and error.