New to the MPC production world? Got a music production question that's not really specific to any particular MPC? Try your luck here and get help from our experienced members.
By dj crack Fri Nov 02, 2007 12:46 am
after im done triming a sample that i cut before hand on my comp to get it to a smaller size i go to save it or convrt button and im getting the insufficant memory error i checked and i have PLENTY of space on my CF so what gives?
User avatar

By konc3pt Fri Nov 02, 2007 12:52 am
what mpc are you using.

RAM memory of mpc is different than storage memory of CF card.

older mpc's can hold up 32MB worth of samples when expanded(16mb stock) newer mp's like 1000 and 2500 are expandable to 128MB. 4000 is 272 MB stock expandable to 512MB
Last edited by konc3pt on Fri Nov 02, 2007 12:57 am, edited 1 time in total.

By dj crack Fri Nov 02, 2007 12:56 am
1000

im only trying to up one sample

out of my 246 mb on the CF

9.34 MB is used

free i have 236

something aint rit
User avatar

By konc3pt Fri Nov 02, 2007 1:07 am
if you dont got 128MB expansion installed, then you can only load up to 16MB worth of samples to your MP, which is only few seconds in stereo, and under a minute in mono I think
User avatar

By konc3pt Fri Nov 02, 2007 1:10 am
na, everything cool, you gotta expand ram to 128MB

9.34 MB is used, so you only got about 6.66MB left which is being used by onboard sounds that your 1k came with


once again, CF card memory is not your RAM memory.


RAM memory is what you use when working with samples, like chopping, sampling etc, right now you only have 16MB to do that. you gotta expand your MPC to 128MB. CF card is only for saving your work and nothing else.

By dj crack Fri Nov 02, 2007 1:17 am
konc3pt wrote:na, everything cool, you gotta expand ram to 128MB

9.34 MB is used, so you only got about 6.66MB left which is being used by onboard sounds that your 1k came with


once again, CF card memory is not your RAM memory.


RAM memory is what you use when working with samples, like chopping, sampling etc, right now you only have 16MB to do that. you gotta expand your MPC to 128MB. CF card is only for saving your work and nothing else.


ok so what if i deleted all the sounds it came with would that free the WAV room
User avatar

By konc3pt Fri Nov 02, 2007 2:39 am
the operating system of the MPC, takes about 1mb itself. what you gonna delete that too?... you really playing around with fractions here. why not get 128MB expansion ?

By dj crack Fri Nov 02, 2007 2:44 am
konc3pt wrote:the operating system of the MPC, takes about 1mb itself. what you gonna delete that too?... you really playing around with fractions here. why not get 128MB expansion ?


if i dont have to i wont but it seems like i have too.know anywhere to buy it?
User avatar

By konc3pt Fri Nov 02, 2007 3:08 am
for third party, much cheaper ram hit up the thread below
it gotta be 144pin, PC100 or PC133, 256mb. so you got 4 banks of 64. 4x64
http://www.mpc-forums.com/viewtopic.php?t=26775


otherwise you need Akai EXM128

By dj crack Fri Nov 02, 2007 7:03 pm
konc3pt wrote:for third party, much cheaper ram hit up the thread below
it gotta be 144pin, PC100 or PC133, 256mb. so you got 4 banks of 64. 4x64
http://www.mpc-forums.com/viewtopic.php?t=26775


otherwise you need Akai EXM128


what is this?....

144pin, PC100 or PC133, 256mb. so you got 4 banks of 64. 4x64

and does it matter what KIND of CF you have?

By Shupe Fri Nov 02, 2007 8:35 pm
I think you're still a little confused. konc3pt explained it pretty well, but here's a little clarification.

RAM=short term memory, aka what you are doing right now. All the samples you have loaded into the MPC at one time is your RAM. the RAM is cleared out when you turn off your MPC. Things can not be stored permenantly in RAM.

CF=long term memory. You save what is in your RAM to your CF when you are done working, this way you don't loose your data when you power down the MPC.

You could have a 2 GB CF card but you still can't get more than 128MB of samples in your RAM (or 16MB in your case, until you actually upgrade).
User avatar

By t_bias Sat Nov 03, 2007 12:16 am
to use distortedtekno's analogy...

RAM is your desktop.

CF/HD are your desk drawers.

you can store heaps of stuff in the drawers, but you can only have a certain
amount of stuff on the desktop at any one time. when you get done with whats
on your desktop you better remember to put it back in the drawers.


shupe explained this way better, but i just like the analogy... :lol:

By dj crack Sat Nov 03, 2007 6:48 am
ya i get all the saving and stuff i just dont get where you buy the 3rd party RAM for the 1000 i went into that post of where it talks about it and i saw stuff that you need certain types of CF cards and if i bought the akai ram...does that work with every MPC including my 1000? and my CF card no matter what brand it is?
User avatar

By konc3pt Sat Nov 03, 2007 9:41 pm
dj crack wrote:where you buy the 3rd party RAM for the 1000



any pc outlet store

By shza Sun Nov 04, 2007 4:50 pm
konc3pt wrote:
dj crack wrote:where you buy the 3rd party RAM for the 1000



any pc outlet store

So quick question.. HOw much sample time is 128 MB??