JJ OS Bug Reports (ARCHIVE)

Submit bug reports and feature requests for the JJOS-XL and 2XL
 Topic locked Share on Facebook
User avatar

By le rat Tue Nov 20, 2007 2:40 pm
my bad, it's os JJ 4.90

I've tried to reproduce it but was difficult.
On a blank sequence only a kick and a snare at full level.

got this :
Image




i don't remember well but i think the other day when i got a phasing effect the "D" value was slightly different. I'm not sure though
User avatar

By le rat Thu Nov 22, 2007 2:27 pm
anyway i upgraded to 4.93

In Q link mode, when defining two values ( lowest and highest) for a pad, those values don't appear in Q real edit gride ( stay at 0-100).

I guess it's a bug no?

Plus each time i mess with real time Q link, i got some weirdness.
I had no sound coming out from other pads than the real time Q linked one.
I had to restart.
User avatar

seq edit - copy bug!!!! JJOS V4.93 & V4.92 etc...

By arebee Fri Nov 23, 2007 4:29 pm
when i copy all events in one track from a 4bar seq, to the same track number in an 8bar seq, ALL events in ALL tracks don't play after the start of the 5th bar:

(eg: mode+Pad13, seq edit)

"edit:copy
time:
001:01:00 - 005:01:00
notes:
ALL

from sq:10 tr:13
to sq:11 tr:13

mode:replace
start:001:01:00
copies:2"

as soon as i "do it" nothing in the entire sequence11 that should occur at or after position 005:01:00 plays.

i can see that all original (and newly copied) events are still there in the step edit (mode+pad14) but they just don't play.

only when i delete the recently copied track containing the newly copied stuff in tr:13 (copied from sq:10, tr:13) does all the events after 005:01:00 in sq:11 play normally again.

fkn wierd

By tony666 Sat Nov 24, 2007 11:44 am
I get some nasty clicks in JJ OS 3.08 , can somebody confirm this ? I only had the Akai 3.06 OS on the mpc1000 for a couple of hours, but i don't remember of it having any clicks. The clicks appear on the phones output and main outputs, so I think it's really a software orientated problem?

problem solved :

when you load a library that is to large for the memory, you get these clicks when using the samples that could be imported.
User avatar

Re: seq edit - copy bug!!!! JJOS V4.93 & V4.92 etc...

By arebee Mon Nov 26, 2007 1:54 pm
arebee wrote:when i copy all events in one track from a 4bar seq, to the same track number in an 8bar seq, ALL events in ALL tracks don't play after the start of the 5th bar:

(eg: mode+Pad13, seq edit)

"edit:copy
time:
001:01:00 - 005:01:00
notes:
ALL

from sq:10 tr:13
to sq:11 tr:13

mode:replace
start:001:01:00
copies:2"

as soon as i "do it" nothing in the entire sequence11 that should occur at or after position 005:01:00 plays.

i can see that all original (and newly copied) events are still there in the step edit (mode+pad14) but they just don't play.

only when i delete the recently copied track containing the newly copied stuff in tr:13 (copied from sq:10, tr:13) does all the events after 005:01:00 in sq:11 play normally again.

fkn wierd


i've found the problem cause : its caused by q-real events very close to each other. i made a qreal recording for these particular tracks, and at some point (accidentally) two events were 2 ticks apart (probably if quantise set too low or off - when "insert qreal fade" used),

and equal event values....i think that they were just before the very bar-end may have something to do with the problem (events of 'cutoff:+50' at pos. 004:04:92, and 004:04:94), as soon as the very last event is removed, the sequence plays properly after it.
User avatar

4.93

By le rat Wed Nov 28, 2007 7:57 pm
an old bug that still appear from time to time. Once you've rendered a song and you try to play it, only the first sequence loop and you have to put loop off on the main screen to make it play normally.
User avatar

os2 0.66

By le rat Sat Dec 01, 2007 11:03 am
I've loaded a 4.93 project in os2 0.66.

first i feel the output level of headphones is louder than before.
The levels i had mixed in the os1 project is are not respected.
I miss the velocity track in main mode.
I'm not a big fan of previewing grid in main mode, i don't like kind of "visual concept" when recording.
When switching DRUM to AUDIO in main screen the mpc acts strange.
In NDC seems it plays the whole sample from start to the end.

last but not least it's not powor but power :wink:
User avatar

By Antonym Sat Dec 01, 2007 11:37 pm
os1 projects will not load well into os2. i don't think this is going to be addressed.

NDC appears to play the entire sample. you change the start/end points of each pad. there are 16 chops that can be made with NDC.
User avatar

By g4s Mon Dec 03, 2007 9:10 pm
MPC freezes when I load a few samples used in OS1 into 0.66 - assign to pad screen. Screen display becomes garbled - a bit like the crashes I used to get on the early MPC2000XL OS.

G4s
User avatar

By distortedtekno Tue Dec 04, 2007 4:04 am
g4s wrote:MPC freezes when I load a few samples used in OS1 into 0.66 - assign to pad screen. Screen display becomes garbled - a bit like the crashes I used to get on the early MPC2000XL OS.

G4s

Yeah I just noticed the same problem a few minutes ago. The first time it crashed. The second time it didn't. I was able to exit to the main screen.
User avatar

answer from JJ

By le rat Wed Dec 05, 2007 1:25 am

LOW and HIGT which were set up on MODE+PAD1 (SLIDER) screen do not work on Q-REAL. Thank you.
User avatar

By bees80 Thu Dec 06, 2007 10:26 am
using os 4.95 ( same problem occured with 4.93 and 4.94)

- go to trim mode
- set cursor on start point of the loop
- press after on the top q link slider
- now slide

I am noticing a very strange behaviour of the slider, it just randomly selects something.

If i do the same on the end point of the sample with the other qlink slider it works great!

Anyone having the same problem or is my upper q link slider broken or something ? :)
User avatar

4.93 os

By le rat Thu Dec 06, 2007 4:04 pm
same bug as before :
when pressing overdub then tap tempo + datawheel + copy = TC change
User avatar

By distortedtekno Fri Dec 07, 2007 9:18 am
OS2 version 0.68

1. Load pgm from ADSR EXAMPLE folder with sample
2. Hit MODE + PAD 11 (GPE)

BUG: "under construction" message appears, the same as MODE + PAD 7 (PROGRAM).

NOTE: This bug does not appear when a sample is not loaded.

NOTE 2: When F2 or any of the F keys are hit in MODE + PAD 7, the screen turns blank and boot screen will appear. but will not reboot.
User avatar

By distortedtekno Fri Dec 07, 2007 9:26 am
The boot screen will also appear when pressing the F buttons in GPE when a sample is loaded.

This version is definitely not usable. So I'm still not ready to purchase a password.
 Topic locked
Return to JJOS Bug Reports & Feature Requests