By guypicciotto
Mon Dec 17, 2007 10:23 pm
Hey guys, just a quick question. I've been sampling from my cd deck through my mpc 500, and running the audio out through both the headphone out and the main l/r outs whilst monitoring.
When monitoring the signal through the main l/r outs, i am only recieving a feed through one speaker, even though the mpc is set to record through stereo and i have two 1/4" jacks hooked up to both speakers from the mpc. When playing the feed back through headphones, i am only recieving one side there also.
I have checked all my leads and connections, and the only hint of any bad contact is the headphone out 1/8" to 1/4" jack adapter which, when i tweak it a little bit, gives me sound in stereo briefly, then cuts back to one speaker.
I know this is long-winded, but i would appreciate some help from someone that knows what they are doing.
Dave.
When monitoring the signal through the main l/r outs, i am only recieving a feed through one speaker, even though the mpc is set to record through stereo and i have two 1/4" jacks hooked up to both speakers from the mpc. When playing the feed back through headphones, i am only recieving one side there also.
I have checked all my leads and connections, and the only hint of any bad contact is the headphone out 1/8" to 1/4" jack adapter which, when i tweak it a little bit, gives me sound in stereo briefly, then cuts back to one speaker.
I know this is long-winded, but i would appreciate some help from someone that knows what they are doing.
Dave.