New to the MPC production world? Got a music production question that's not really specific to any particular MPC? Try your luck here and get help from our experienced members.
By iizzjazz Tue Apr 08, 2008 2:55 pm
ok so i finally got the money together to get an mpc. so i have a few questions. be as easy as possible lol i have searched the forums as much as possible and didnt find my question answered.

ok so i am wondering can i use my m-audio mobile pre usb preamp to link into my mpc and turntable to sample? or do i have to get a turntable mixer or a regular audio mixer. please help i need to figure out wether or not i have to buy something or if i can use my preamp. thanks
User avatar

By illiterati Tue Apr 08, 2008 3:31 pm
does your m audio mobile pre have a phono in and a ground?
it would need that to take a deck -

otherwise youll need a dj mixer, (or if you have a hi fi amp with ground and phono in you can send the deck to that (deck>amp>mpc).)

basically you need a phono in and ground - some dj mixers generate background noise that'll make your samples imperfect - so ask around before buying - i cant recommend mine - its a pioneer djm 500 and you can hear dirt when you turn the volume right up.

good luck.
User avatar

By cozy Tue Apr 08, 2008 4:07 pm
you dont need a dj mixer. you need a phono preamp.

tt to phono preamp

preamp to mobilepre/mpc, depending on what you are using to sample. i run my preamp directly to the mpc and have the input thru on so if i want to sample on the computer, which i dont, the audio is already passing through, no problems.

i paid $50 for a phono preamp at guitar center.

By mwalker Wed Apr 09, 2008 5:39 pm
you best bet is to get a mixer just in case you want to buy other hardware down the road.
User avatar

By dopedee Thu Apr 10, 2008 12:52 am
best bet is a dj mixer for sure. Yes phono pre amp will work but get a cheap little dj mixer. Trust me.

Re:

By mwalker Fri Apr 11, 2008 12:31 pm
dopedee wrote:best bet is a dj mixer for sure. Yes phono pre amp will work but get a cheap little dj mixer. Trust me.


no, he/she should get a 12 input mixer and not a dj mixer.
User avatar
By dopedee Sat Apr 12, 2008 11:25 am
mwalker wrote:
dopedee wrote:best bet is a dj mixer for sure. Yes phono pre amp will work but get a cheap little dj mixer. Trust me.


no, he/she should get a 12 input mixer and not a dj mixer.
]

also an option yes. Usually a little outside of the budget and request of the poster but yeah sure that works too.. (isnt the issue him/her trying to ground a turntable?) hm

Amoung many options listed here, the one thing i dont have is a stand alone phono pre amp, so cant help ya much there. Im sure some one around here is familiar. Good luck.
By mwalker Sat Apr 12, 2008 1:14 pm
dopedee wrote:
mwalker wrote:
dopedee wrote:best bet is a dj mixer for sure. Yes phono pre amp will work but get a cheap little dj mixer. Trust me.


no, he/she should get a 12 input mixer and not a dj mixer.
]

also an option yes. Usually a little outside of the budget and request of the poster but yeah sure that works too.. (isnt the issue him/her trying to ground a turntable?) hm

Amoung many options listed here, the one thing i dont have is a stand alone phono pre amp, so cant help ya much there. Im sure some one around here is familiar. Good luck.


i think a 12 input mixer is a better bet because of future growth. it may cost more but if one decides to purchase more hardware all he/she needs are cables.

my experiences is that the "cheap comes out expensive". you may be saving money today but you will be spending more in the long run.

yes, there are allot of options but in the long run a 12 input mixer would be the cheapest way to go.
User avatar
By eastcoast121 Sat Apr 12, 2008 4:47 pm
iizzjazz wrote:thanks guys i got a phono preamp. now when i sample it records this buzzing noise. and it doesnt record the music. what do i do now?


make sure that you ground your turntable. There should be a ground wire coming out of your turntable. you need to connect it to the ground on the preamp. on mine, you just had to unscrew this little party then put the wire on and screw it back so it held the wire in place.