By Maxillaa
Sun Apr 06, 2008 7:37 pm
DJ Six wrote:Maxillaa i can't tell from the pix, are the LEDs still exposed for all buttons?
Was that from Style Flip?
This isn't helpin me get mine done.
Totally can't decide now if I still wanna paint or not.
naah,won`t pay that shitload of money for something I can do within one afternoon........
no the LEDs are not exposed yet...
buy the vinyl from an advertising company or watch the web,even ebay got multiple offers.
I got that 0.7 mm thick(thicker might be a problem)vinyl 1 squaremeter for 7.50 euros......
use a sponge to make the surface a little wet,take off the paper(off the vinyl).
position it and push all the bubbles below the vinyl out by using a towel or something more pro-like that`s called rakel in german(nobody was able to translate that,sorry...but it`s in the picture below).
make sure all the details of your mpc,like the vents if you own a 2000,got a little profiled(that they`re a little pushed into,makes it easier to cut them out later).
as your mpc is wrapped take off the overlapping material(always in mind what`s left is left).
before cutting the vents,screen and all the other holes,press the material on the edge so you can see where to cut and not pull off the material....
I cutted them not directly at the edge,one millimeter is better,you won`t see the metal.especially if you pull a dark colour on your mpc this looks not that pro...
if you got further questions,let me know.......
I`m sorry,the resize function didn`t work.............
