Technical questions for the MPC2000xl and the MPC2000
By NEON Sun Jun 22, 2008 6:08 pm
hi
i am newbee in the mpc world so i have some questions

i want to install a hard disk into my mpc 2000 xl
how may i do it
????
By scsiforsamplers.com Sun Jun 22, 2008 11:26 pm
Generally speaking, you don't want to install a SCSI hard drive inside the XL - the power supply cannot support the power drain and the XL was not built for an internal hard drive heat-wise. I have heard of people installing a notebook 2.5" hard drive but that will require an IDE-to-SCSI adapter card (slow and not cheap), as well as some degree of customization capability on your part. I don't believe I've ever seen a turn-key kit for doing this type of installation.

This is why you see so many people talking about installing zip drives and card reader drives in the place of their floppy drives - those are easy options to install and provide decent storage. Card Reader drives are very reliable and make no noise during operation. My personal opinion of zip drives is not good but many people swear by them.
User avatar
By LunaticBastard Mon Jun 23, 2008 3:21 am
not true at all. installation is simple. even easier if you dont have a 8out card installed. power is sufficient and install only requires you to rewire the power. or you could just buy the cable for power from vst or mpcstuff. heres the part you need. 50pin scsi to 80pin scsi adaptor. or you could track down a 50pin drive. but they are small and cost alot. 80 pin drives are cheap and big.

Image
Image
User avatar
By JUKE 179r Sun Jun 29, 2008 7:10 pm
Check out http://www.mpc2000xl.com/Internalhd.htm.
I got a 9Gb laptop HD in my 2000XL and a SCSI card reader. Really easy to do. Just follow the steps.
Saving to the HD is way faster than to a memory card.
User avatar
By Swissmaster_Cheese Tue Jul 01, 2008 2:50 am
LunaticBastard wrote:thats the one

I love you, man.
No fobe-O