JJ OS Bug Reports (ARCHIVE)

arebee wrote:has anyone noticed if LFO sttings arent working on their Patched Phrases?

if i set up an LFO on a pad thats got a PP assigned there, eg: a fast (0.12) rate LFO, say full pitch : 100 & zero delay: 0.00 (just to be absolutely audible).

the LFO doesn't actually begin to modulate anything until the pp's at the end, as if its not in effect until there's a "note off".

in one random case i managed to get it to kick in half way through a long PP sample, no idea why or how.

does anyone know if the adsr's have anything to do with altering the lfo in JJos2? i had a suspicion it was maybe interfering with the lfo's here.

confirmed. it seems the lfo's only kick in on the last 'segment' (or chop) of the patched phrase.

i don't think this has anything to do with the adsr's. i think this is just a straight up BUG.

time to report it. ...yo JJ !

OS2 1.20
Dont know if this has been mentioned,

1 Have a short sample playing with BPF 45 setting, hit the pad and no sound, hit play and the sample plays with the filter setting( the filter is not out of range as i set it while the seq was playing to get a nice "fit")

2 While playing the main sequence select the track that has this sample on it (track 11)

3 hit the pad with the sample on it and it mutes the sample from playing in the seq.

4 hit stop and play again and it plays........as soon as i touch the pad that has the sample on it ( the one with a BPF 45) it mutes the sound from the playing.
This only happens while i have the track selected in MAIN or GRID

settings wise the sample has nothing else affecting it except the filter,

quite a annoying bug as i have duplicated it with another sound, seems i cannot use LPF or BPF ( or certain ranges in them) as they will cause this to happen HPF seems to work fine

Yeah, that playstart thing was very helpful, he should bring that back.

seems it won't be back, Murai told me he had lots of feature requests to change it the way it is now on os2.

I don't really like how os2 is sometimes a step backward from os1 (just like 1/32 is unusable in grid edit).

Sooty_G wrote:

arebee wrote:LFO sttings arent working on Patched Phrases

confirmed. it seems the lfo's only kick in on the last 'segment' (or chop) of the patched phrase.

i don't think this has anything to do with the adsr's. i think this is just a straight up BUG.

time to report it. ...yo JJ !

sooty et al,

the dudes at jj are saying that this isnt likely to be resolved, its a bug that if repaired could release a whole load of other bugs, so fingers crossed - hold tight for now, cos unfortunately - PP's are suffering for the foreseeable future.

cyklops wrote:OS2 1.20
Dont know if this has been mentioned,

1 Have a short sample playing with BPF 45 setting, hit the pad and no sound, hit play and the sample plays with the filter setting( the filter is not out of range as i set it while the seq was playing to get a nice "fit")

2 While playing the main sequence select the track that has this sample on it (track 11)

3 hit the pad with the sample on it and it mutes the sample from playing in the seq.

4 hit stop and play again and it plays........as soon as i touch the pad that has the sample on it ( the one with a BPF 45) it mutes the sound from the playing.
This only happens while i have the track selected in MAIN or GRID

settings wise the sample has nothing else affecting it except the filter,


quite a annoying bug as i have duplicated it with another sound, seems i cannot use LPF or BPF ( or certain ranges in them) as they will cause this to happen HPF seems to work fine

Am I the only one with this bug or something, can someone please try re-create this, its really such a annoying bug.

Hi,
Running JJOS2 v1.20 and was controlling external Access Virus Synth using MPC fine (in live situation). I've now added a Oxygen 8 v2 midi keyboard to control synth too (need both MPC and Oxygen to control synth). Best way I could configure chain is Oxygen midi out to midi in 1 of MPC and MPC Midi A Out to synth. I set Soft through to ON but MPC now keeps crashing. I suspect it might be something to with Midi Out After touch. Here's the error message and how I've configured the midi page:





Any help much appreciated!

Sorry, I was meant to post this in bug reports but I started new topic by accident!

Can I move it there?

graphics bug

1- load project
2- set bars to 2
3- create a MIDI track
4- record a performance
5- enter MIDI GRID EDIT
6- zoom in all the way. only BAR 1 should be visible
7- hit PLAY
8- ZOOM OUT while the MPC is still playing BAR 1
9- BUG: graphics are messed up after BAR 2
10- NOTE: this occurs in TRACKS of ANY length. 2 is simply for this example.

there are also minor graphic bugs in os2 main screen if you change the time sig. (for instance setting it to 9/4 or stuff like that)

another small bug or strange behavior. For Instance, If you render a 3/4 song and then insert 2 bars at the begining for track and sync purpose, these 2 first bars will be 4/4. Not a big deal but I've noticed it for the fisrt time yesterday.

Another bug not sure if anyones caught this in JJ 1.49 which really sucks is that Second Sequence data is NOT Loaded up along with regular sequences. If I select off however the regular sequence data loads just fine.
Also if You have multiple programs and each sequence uses different ones and you go to copy data Event data from say Sequence 1 Track 1 to Sequence 3 track 3 the Programs are NOT loaded up and you must jog them in manually.
SUCKS but maybe this is fixed in another version?
Is 4.9 the bst version for OS1?
Thanks
Freddy

cyklops wrote:

cyklops wrote:OS2 1.20
Dont know if this has been mentioned,

1 Have a short sample playing with BPF 45 setting, hit the pad and no sound, hit play and the sample plays with the filter setting( the filter is not out of range as i set it while the seq was playing to get a nice "fit")

2 While playing the main sequence select the track that has this sample on it (track 11)

3 hit the pad with the sample on it and it mutes the sample from playing in the seq.

4 hit stop and play again and it plays........as soon as i touch the pad that has the sample on it ( the one with a BPF 45) it mutes the sound from the playing.
This only happens while i have the track selected in MAIN or GRID

settings wise the sample has nothing else affecting it except the filter,


quite a annoying bug as i have duplicated it with another sound, seems i cannot use LPF or BPF ( or certain ranges in them) as they will cause this to happen HPF seems to work fine

Am I the only one with this bug or something, can someone please try re-create this, its really such a annoying bug.

Not happening for me with 1.21
Is this still happening? Do you mind uploading the project whit that happening?

le rat wrote:another small bug or strange behavior. For Instance, If you render a 3/4 song and then insert 2 bars at the begining for track and sync purpose, these 2 first bars will be 4/4. Not a big deal but I've noticed it for the fisrt time yesterday.

So you converted the song to a new sequence and then inserted the bars by seq edit? There´s an option which time signature the bars added will have.

1. Power on
2. Load a project
3. Mount USB connection
4. Press "main" to dismount
5. Press "play" or "play start"
6. Press "track mute"
Bug: Sequence hangs for a split second

1. Set samples on pad A01 and A02 (or any other two pads)
2. Mode + Pad7 (program)
3. Press F5 twice (mute)
4. Select Pad A01, set Mute Target1 to A02, Pad A02 is muted by Pad A01
5. Set Pad A01 to Mute Group 1
Bug: Pad A02 is no longer muted by Pad A01

Edit: OS2 1.21 btw

So you converted the song to a new sequence and then inserted the bars by seq edit? There´s an option which time signature the bars added will have.

Oh really? in seq edit?