mpc 1000 outputs

what can you plug int the mpc1000 outputs, give me examples.

Give me examples... please.

me too

http://www.akaipro.com/int/mpc1k/mpc1k_spec.html

See Inputs/Outputs

any other device that has complementary inputs/outputs will work fine.

Hmm, after looking at the specs on the page, it looks like they may have an error:

Record input (L and R)

1/4-inch stereo phone x 2, balanced -40dBu, input impedance 11k ohms Max. Input level +10dBu

That should be Mono... ? The manual has the same error.

you can plug it into an amp or receiver. I use speakers instead of headphones. You can also plug it into mixer.

Anything that can take a line-level signal, really. Rack FX, mixer channels, other samplers.
Hook up 17 fuzzboxes in a chain for that special Götterdämmerung sound

I'm guessing that they are a little repetitive about the "balanced" part, and by stereo they mean "TRS".

btw-Nords work well with both outs & ins (saw your pic in the Pics thread)

stephen wrote:Hmm, after looking at the specs on the page, it looks like they may have an error:

Record input (L and R)

1/4-inch stereo phone x 2, balanced -40dBu, input impedance 11k ohms Max. Input level +10dBu

That should be Mono... ? The manual has the same error.

It's a stereo-type socket carrying a mono balanced signal (using 3 wires) . If what you're plugging in to can take a balanced signal, use a stereo cable to keep it balanced all the way (less chance of noise pickup). Or use a mono cable for an unbalanced signal, not a problem...