why do i lose my efx when i am on the 8 outboard

Technical questions for the MPC2000xl and the MPC2000
 Topic locked Share on Facebook

why do i lose my efx when i am on the 8 outboard

By sigher Tue Jan 20, 2009 5:28 pm
hi im a newbie so hello and all that,

wondered why when i assign my samples onto the desks 8 outs that i lose the
efx i put on them
although they play when i go out of the 2 stereos??

thanks

Re: why do i lose my efx when i am on the 8 outboard

By sigher Tue Jan 20, 2009 5:37 pm
ok mate
yeah that sounds about right, didnt know if it was me or not...

im going into the studio tomorrow so can do them there but of course its
starting putting them down from scratch again.
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By Lampdog Tue Jan 20, 2009 5:39 pm
If both of you bother to READ the 2kxl manual, you'll see HOW to get effects onto the 8out board.

I've done it before, so I know it works.

Geez, people cmon, use that grey matter.
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By Lampdog Tue Jan 20, 2009 7:34 pm
Start with the mixer section and read forward, you've
gotta put some work effort into this.

Or get the pdf manual, Use the "FIND" function and "NEXT" function and look up words that may
concern the 8 out board, the pdf will FIND the first word, and NEXT will find the next instance of that same word
in the pdf manual. Too easy.

Re: why do i lose my efx when i am on the 8 outboard

By Paul_Caruso Wed Jan 21, 2009 7:46 pm
Lampdog - I know being a manual-obsessed smartass is your whole schtick but what are you the Riddler? You typed more words giving him clues about where and how to find the information as you would have just telling him the answer.

Get a grip.
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By ReckOne Wed Jan 21, 2009 7:59 pm
Yeah WTF man...Seriously...What about using your own brain for once instead of always coming across mad lazy and/or stupid and wanting somebody else to hand over the answers to the most basic questions explained in the manual, e-books and all over the internet...

Sh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!t
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By The Grublet Thu Jan 22, 2009 5:34 am
I know being a manual-obsessed smartass is your whole schtick but what are you the Riddler?
:idea:
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By Lampdog Thu Jan 22, 2009 8:34 am
Paul_Caruso wrote:Lampdog - I know being a manual-obsessed smartass is your whole schtick but what are you the Riddler? You typed more words giving him clues about where and how to find the information as you would have just telling him the answer.

Get a grip.


You know what.

Fuk that.

It's in the manual. Read it.

You did the same as me, with NO ANSWER, but I provided direction, U DID NOT.



Give a man a fish vs teach a man to fish.

Think about that for a second........






..........
..........











..come to "grips" with that and join back in when you ready.
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By zbigi Thu Jan 22, 2009 10:47 am
go to the fxedit -> press open window on the mix box/field -> set fx output to which ever outputs you want them to play out of. m1 and m2 mix box, not r1 or r2

maybe instead of wasting time on manual just press open window on anything you can i never read that shit, just went open window crazy
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By deck daddy Thu Jan 22, 2009 1:04 pm
zbigi wrote:go to the fxedit -> press open window on the mix box/field -> set fx output to which ever outputs you want them to play out of. m1 and m2 mix box, not r1 or r2

maybe instead of wasting time on manual just press open window on anything you can i never read that ****, just went open window crazy


Word, OPEN WINDOW IS MY SH!T! Hit it on everything and you will see that the MPC is deep!
User avatar

Re: why do i lose my efx when i am on the 8 outboard

By Lampdog Thu Jan 22, 2009 1:13 pm
zbigi wrote:go to the fxedit -> press open window on the mix box/field -> set fx output to which ever outputs you want them to play out of. m1 and m2 mix box, not r1 or r2

maybe instead of wasting time on manual just press open window on anything you can i never read that shit, just went open window crazy


I've been telling people OPEN WINDOW on everything for a long time, glad to see that you know it too, open window really helps.

Reading the manual aint wasting time though.
 Topic locked
Return to MPC2000xl, MPC2000