how do you change midi velocity?

hey guys,

i have my mpc1k jjos2 1.22 connected to an roland JV-1010.
Every Midi-Track is assigned to a Midi-Channel.
Everything works great!

My only Question is:

Is there a way to change the Track Velocity for a Midi Channel?

For Example:

I have my Rhodes Sound on channel 5 und my Base on Channel 6.
The Base is to loud und the Rhodes zo quiet.

Is there a way to change it in the MPC?


peace

cRuZz

On the Akai OS the track velocity could be adjusted from the main screen, JJ removed this.
Try this workaround:
Set a qlink to send out a midi cc (i think its #7 for volume).

track velocity is back in os2xl no?

velocity only corresponds to volume if you set it to correspond to volume on the controlled device - velocity does not always = volume. just adjust the level on the controlled device.

le rat wrote:track velocity is back in os2xl no?

Dont know, dont care

Nym wrote:velocity only corresponds to volume if you set it to correspond to volume on the controlled device - velocity does not always = volume. just adjust the level on the controlled device.

True.

So doing it with the cc for volume is even better than adjusting the velocity, as it doesnt matter if/how the velocity modulates the sound.

seriously just change the track volume in the module.

seriously man! just do it. sheesh!

mode pad 13, scroll to velocity, u can add or subtract values to tracks here.

Track Velocity works for me to control the volume of the Motif, Fantom and Triton.

get os2xl.

thx very much...

i think the best way is to change volume in my jv and than dump settings to the mp..

thats how i do it now...and it works very well...


bye

cruzz

cant you set the levls inside the module, then these should be saved within that multi/performance patch. or better yet run everything into a mixer and adjust it there.