FX bug? or just dont know how on OS XL

I have an issue with th FX
I used the bit grunger in a programm# 1 for a few samples, on depth 7
Went into another program# 2 , used also the bit grunger, on depth 2
When i go back on the first programm#1 the dept changed also to depth 2
All the program must have the same setup?

Second thind I cannot do: apply in the same program different depth to different sample , I only can change the depth of the fx for the whole program.

Thx for anyhelp

The fx are global settings rather than program settings and you only have two- fx1 and fx2. You can adjust send amounts per pad or per program to make subtle differnces on some of the fx.

With an effect like the bit grunger, I recommend using multiple effects profiles and applying them in the step edit sequencer where you want them to change. You WILL only be able to have one profile going at any given time, however, so if you want to use different bit grunger settings simultaneously you're going to need to use both of your effects slots up using them. You can find more information in the on-line manuals and through experimentation, but if you're still stuck post here again. Multiple effects profiles can be great for making the most out of what the limited onboard effects have to offer.

odds are you have a pc. it's worth going on ebay and getting a delta66 or delta44 or something + an uno or some other midi interface and using the combination to apply better fx to your mpc tracks. the onboard mpc effects are really for the most desperate of situations, if only for the sheer limitation of 2 per current project. the door that midi interface + audio interface opens quickly becomes something much wider

Thx very much