sync mpc and reason

my motif and mpc are synced perfectly.

I also synced reason with no problems, except, the tempo is set at 0 but it plays back at 120.

Reason says the master (mpc) should set the tempo.

But it doesn't. I've got MIDI clock, midi time code and mmc all to on, and to be sure, i set it to all out on the 4k.

On the motif i manually set the tempo to be the same as on the mpc, but reason wont let me do this unless i switch back to internal sync.

So how to:

Make the mpc tell reason what bpm to use, OR have reason synced with the mpc, but be able to manually change the tempo.

bumping

bumping papaaaoung pong

CUM ON answer my urgent need for an answer

I upload a PDF with step by step instructions on setting the MPC as a sequencer for various setups...

http://www.sendspace.com/file/0wo6xy

Great post mister sosa, but the pdf does not address the issue of synchronisation.

LOL

Thanks clint, I didnt download it for nothing.

There must be a way, since it's already synced, it's just the bpm parameter that is missing.

help

I am using reason 4.0 and an mpc 4000 and a mpk49 with a usb m audio uno 1x1
power from usb of macbook

i know what im doing not a noob here but am so frusterated i feel i have to post

midi out of mpk to midi in I of mpc

(this is done with a regular midi cable)



midi in of mpk to mpc out a
(this is done with the usb uno midi cable)

goto reason sync=internal
bus a --akai mpk49
midi clokc sync-USB UNO MIDI


i set my mpc to the following
out = out a channel 1 or 2 or 3 or 4 etc. corresponding to the idi channel selected in reason I.E. NNXT Masterin In:

why cant i get sounds from reason to play out of my monitors which are plugged into the back of the mpc.

I turn on mpk then mpc then reason in that order and have yet to get anything or help from penfolds article or his video response or the file mr sosa posted for dl

fotilx470 wrote:help

I am using reason 4.0 and an mpc 4000 and a mpk49 with a usb m audio uno 1x1
power from usb of macbook

i know what im doing not a noob here but am so frusterated i feel i have to post

midi out of mpk to midi in I of mpc

(this is done with a regular midi cable)



midi in of mpk to mpc out a
(this is done with the usb uno midi cable)

goto reason sync=internal
bus a --akai mpk49
midi clokc sync-USB UNO MIDI


i set my mpc to the following
out = out a channel 1 or 2 or 3 or 4 etc. corresponding to the idi channel selected in reason I.E. NNXT Masterin In:

why cant i get sounds from reason to play out of my monitors which are plugged into the back of the mpc.

I turn on mpk then mpc then reason in that order and have yet to get anything or help from penfolds article or his video response or the file mr sosa posted for dl

Go here its my tutorial...
viewtopic.php?f=5&t=109463

fotilx470 wrote:help

I am using reason 4.0 and an mpc 4000 and a mpk49 with a usb m audio uno 1x1
power from usb of macbook

i know what im doing not a noob here but am so frusterated i feel i have to post

Once is enough. Don't try to hijack other threads, you have already started three or four on the same issue.