reason as sound module mpk49 mpc 4000

help

I am using reason 4.0 and an mpc 4000 and a mpk49 with a usb m audio uno 1x1
power from usb of macbook

i know what im doing not a noob here but am so frusterated i feel i have to post

midi out of mpk to midi in I of mpc

(this is done with a regular midi cable)



midi in of mpk to mpc out a
(this is done with the usb uno midi cable)

goto reason sync=internal
bus a --akai mpk49
midi clokc sync-USB UNO MIDI


i set my mpc to the following
out = out a channel 1 or 2 or 3 or 4 etc. corresponding to the idi channel selected in reason I.E. NNXT Masterin In:

why cant i get sounds from reason to play out of my monitors which are plugged into the back of the mpc.

I turn on mpk then mpc then reason in that order and have yet to get anything or help from penfolds article or his video response or the file mr sosa posted for dl

"why cant i get sounds from reason to play out of my monitors which are plugged into the back of the mpc."

Thats your problem!

Midi Basics 101

Midi will not transfer audio or sound.

You know how to connect your equipment but do you really know the basics of midi?

You need your computer connected to your Monitors to hear the sounds coming out of Reason.

Having a mixer or audio interface will help.

Have the MPC and your computer connected to the mixer/audio interface then have the monitors connected to the mixer/audio interface and BAM now you can hear from both your computer and MPC.

The M-Audio Uno 1x1 is a midi interface not an audio interface.

Hopefully I didnt come out sounding like an ass.

you have to have the audio connect by means of 1/4" jack to your audio interface or to your soundcard. Midi is just data no audio....