Bmorerepa: sometime last week. My biggest question was whether or not they were going to release an "after-market" upgrade kit for existing users. They couldn't really discern this as it was too early to tell: I just hope there's upgradeability - I'll probably try them again this week. Try hitting them up on the phone lines. It would probably be a better idea to wait a few months as they will certainly be releasing the upgraded 2000XL.
By Bmorerepa
Mon Aug 09, 2004 10:06 pm
Im guessng it will be after namm but thats kinda late that would be next year
By mpc3000
Tue Aug 10, 2004 3:15 am
"USB would be tight"
My MPC2000XL has USB like the MPC1000. I use a USB-SCSI Adapter connected directly to the back of the MPC with a CF reader in the Bay. I just connect to PC and read/write as needed to CF card. I will likely do a mod in which I cut an opening into the casing for a USB connection since I like to use the MPC's SCSI for other things.
My MPC2000XL has USB like the MPC1000. I use a USB-SCSI Adapter connected directly to the back of the MPC with a CF reader in the Bay. I just connect to PC and read/write as needed to CF card. I will likely do a mod in which I cut an opening into the casing for a USB connection since I like to use the MPC's SCSI for other things.

By Krux
Tue Aug 10, 2004 3:59 am
taken from the 'mpc2000xl discontinued' thread..
"As far as I know, they are releasing a 2kXL with a CF Card reader in the next few months..What that means for existing users is to be determined..."
"As far as I know, they are releasing a 2kXL with a CF Card reader in the next few months..What that means for existing users is to be determined..."
By Bmorerepa
Wed Aug 11, 2004 2:44 pm
A hot cakes did you talk to AKAI lately I emailed them again and they sent me this,
This has been proposed in the past, but there has been no definite date set yet for release of any kind of "flash card reader" in the MPC2000XL.
Best Regards,
Product Support
AKAI Professional USA Corp.
Ph: 817 834 1900
Fax: 817 834 1983
www.akaipro.com
This has been proposed in the past, but there has been no definite date set yet for release of any kind of "flash card reader" in the MPC2000XL.
Best Regards,
Product Support
AKAI Professional USA Corp.
Ph: 817 834 1900
Fax: 817 834 1983
www.akaipro.com

By JUKE 179r
Wed Aug 11, 2004 5:03 pm
mpc3000 wrote:"USB would be tight"
My MPC2000XL has USB like the MPC1000. I use a USB-SCSI Adapter connected directly to the back of the MPC with a CF reader in the Bay. I just connect to PC and read/write as needed to CF card. I will likely do a mod in which I cut an opening into the casing for a USB connection since I like to use the MPC's SCSI for other things.
I got some questions for ya MPC3000:
What brand of USB-SCSI adapter and CF card reader did you use?
Is the USB port a 1.1 or 2?
How did you wire in the power for the CF reader? Tapped in from the transformer?
If you got some pictures, I would be very intereseted in doing this mod also. I'm awaiting a microswitch to place in line with the screen on my 2KXL. In theory, when the screen is level the back light will be turned off. When the screen is in the upright position, the light is turned on. We'll see....
MBP 11,3 | Logic | Traktor Pro | MPC500, 4000, 3000LE | MV8800, TR-707, 808 & 909 | ASR-10 | x0xb0x | Technics SL-1200 & SL-1200GLD | 4000+ records
Follow me on MySpace & BlackPlanet.com...
Follow me on MySpace & BlackPlanet.com...
By mkbaproductions
Thu Aug 12, 2004 3:00 am
Ive been lookin for months to find one of those hypermart cf drives that would fit in the floppy drive bay but I cant find any!!!!!!!
By Bmorerepa
Thu Aug 12, 2004 11:09 pm
AKAI hit me back and this is what they said
Brandon,
Before you actually purchase a unit with the Zip drive, you should contact the new distributor and find out when they plan to start shipping the unit with the Flash Card reader.
The new distribute for the AKAI products will be AKAI Professional America and you can contact them at: 401 658 4032
Best Regards,
Product Support

Brandon,
Before you actually purchase a unit with the Zip drive, you should contact the new distributor and find out when they plan to start shipping the unit with the Flash Card reader.
The new distribute for the AKAI products will be AKAI Professional America and you can contact them at: 401 658 4032
Best Regards,
Product Support
By MaZe
Fri Aug 13, 2004 3:23 am
MPC3000, I am also interested in learning how you accomplished this usb to scsi hppk up with your mpc...I have a usb to scsi cable in front of me doing nothing...
MaZe
MaZe
By Bmorerepa
Sat Aug 14, 2004 12:24 am
They told me email Numark and they told me it comes out in 2 months heres the email
Hi Brandon,
These should be shipping in about 2 months.
Sincerely,
Justin Baro
Numark/Alesis/Ion
Technical Support
200 Scenic View Dr.
Ste 201
Cumberland, RI 02864
Phone:401-658-5760
Fax- 401-658-3921
Please include all previously related messages in future emails.
Hi Brandon,
These should be shipping in about 2 months.
Sincerely,
Justin Baro
Numark/Alesis/Ion
Technical Support
200 Scenic View Dr.
Ste 201
Cumberland, RI 02864
Phone:401-658-5760
Fax- 401-658-3921
Please include all previously related messages in future emails.

By -{n8}-
Sat Aug 14, 2004 1:57 am
a CF reader would be sweet but i'm hoping USB functioality too and perhaps with the extra CF space an OS update LOL!! but that's a dream i guess.. in any event, if there is a new expansion option for exsisting users and all this is actually true.. then kudos to AKAI for giving us some kind of support.
1-0ne
1-0ne

