By Banners82
Tue Jan 05, 2010 11:39 am
Why is it when i make a couple of sequences,maybe 4 bars each,and join them copy them together,the first sequence plays,then there is a pause before 2nd sequence starts
By kebzer
Tue Jan 05, 2010 12:42 pm
what king of pause? something like a very small pause, or a entire bar pause?
Toe wrote:When I got to this guys house to pick up my 60 he fired up his sp1200 and played me a beat, I almost cried, it sounded like jesus beatboxing in my ears.
Coz wrote:
Political correctness was shot dead at the door of this forum! It is funny at times though.
By Banners82
Tue Jan 05, 2010 4:46 pm
more of a entire bar pause maybe ,i usually use song mode
By os`kar
Tue Jan 05, 2010 4:51 pm
Banners82 wrote:more of a entire bar pause maybe ,i usually use song mode
are the sequences set to the same tempo?
does this pause happen in song mode as well??
os`kar
MPC2000, S3000xl, Esi-32, RM1X
By Banners82
Tue Jan 05, 2010 5:18 pm
yeh happens in song mode to,mite not be same tempo,does that effect it
By Lampdog
Tue Jan 05, 2010 5:18 pm
Your first sequence has 1 loop sample that runs 4 bars doesn't it?
Triggered at 01.01.01?
Your loop finishes before the next sequence begins, and you get silence
THEN, the next sequence begins, there is your pause. Fix it.
Triggered at 01.01.01?
Your loop finishes before the next sequence begins, and you get silence
THEN, the next sequence begins, there is your pause. Fix it.
Stop getting automatically offended when you see gold letters!
By Banners82
Tue Jan 05, 2010 10:08 pm
dont really understand what u mean lampdog
By Lampdog
Tue Jan 05, 2010 10:15 pm
I'm guessing from what you said.
You didn't detail your situation enough for us to really help you at all.
How r your sequences made up, what type of samples?
Long story short, we can't guess your problem.
You didn't detail your situation enough for us to really help you at all.
How r your sequences made up, what type of samples?
Long story short, we can't guess your problem.
Stop getting automatically offended when you see gold letters!
By Banners82
Tue Jan 05, 2010 11:37 pm
sorry difficult to explain, basically just drum patterns,i will make a 2 bar drum pattern,then copy it to another sequence,then go in song mode,and convert them together
By Banners82
Tue Jan 05, 2010 11:38 pm
appriciate ur help lampdog by way mate
By Lampdog
Wed Jan 06, 2010 12:26 am
A little better yeah, lol.
2 bar drum pattern copied makes 2 separate 2 bar drum patterns.
Go into song mode and join them, I don't see how it doesn't join together?
I thought maybe you were using a 2 bar loop.
Your drum patterns should join right together and fit fine. It has to be your programming.
Maybe timing correct is not what you need it to be. People will tell you turn it off
but that takes ALOT of practice to get that right and down straight, it will drive you crazy if your
just starting off.
Change TC to 1/16 and then make a 2 bar again. Start all over with that. leave it on 1/16 so you can get a feel for that.
2 bar drum pattern copied makes 2 separate 2 bar drum patterns.
Go into song mode and join them, I don't see how it doesn't join together?
I thought maybe you were using a 2 bar loop.
Your drum patterns should join right together and fit fine. It has to be your programming.
Maybe timing correct is not what you need it to be. People will tell you turn it off
but that takes ALOT of practice to get that right and down straight, it will drive you crazy if your
just starting off.
Change TC to 1/16 and then make a 2 bar again. Start all over with that. leave it on 1/16 so you can get a feel for that.
Stop getting automatically offended when you see gold letters!
By dj e.d.e
Wed Jan 06, 2010 11:36 pm
sounds like your first squence is only 2 bars and the copyied is set to 3 bars,
another thing use the params to truncate your sample and pitch it up so it will catch up.
another thing when you convert them in sode mode make sure the window setting is correct,it gives you a few options i can't remember them cause i'm not next to mpc but try all three and see which oneis the right one.
if all fail then go back and chop the sample more in loop mode till it sounds right
another thing use the params to truncate your sample and pitch it up so it will catch up.
another thing when you convert them in sode mode make sure the window setting is correct,it gives you a few options i can't remember them cause i'm not next to mpc but try all three and see which oneis the right one.
if all fail then go back and chop the sample more in loop mode till it sounds right
By mjlevitt
Sat Feb 27, 2010 8:21 pm
Hey y'all, this isn't Banners82 issue, but the subject line ("Joining sequences problems") is true for me.
I'm new to the MPC2000XL, and it seems that every time I string sequences together in song mode, the selected program gets wiped out after the first sequence plays.
So I'm playing in song mode hearing silence after the first sequence finishes. Am I doing something wrong, or maybe is my MPC buggy (it's been heavily used by it's previous owner)?
Any ideas? Lemme know if you need more details to answer this one.
I'm new to the MPC2000XL, and it seems that every time I string sequences together in song mode, the selected program gets wiped out after the first sequence plays.
So I'm playing in song mode hearing silence after the first sequence finishes. Am I doing something wrong, or maybe is my MPC buggy (it's been heavily used by it's previous owner)?
Any ideas? Lemme know if you need more details to answer this one.