By
wudsiba
Mon Jan 25, 2010 3:09 pm
It seems to me like your trying to build very large multi-samples. The Mpc, although it is capable of doing this, really isn't the best at this. If you try to build a large multi-sample stretching the entire range of the keyboard, or the 64 pads, with large samples on each key, you will be lucky if you are able to hold one multisample in the RAM at a time. Leaving little to no room for anything else. For multisamples on the Mp, I use nothing more than three keys per octave. I also try to keep it to one or two octaves. The kind of multisampling that your looking to do is best done on a keyboard. (I believe that the Mpc 4000 may be able to act as a rack type of sampler also...) The Mpc's are designed differently. I use my Fantom X for any large multisamples. Then I'll take just a few of those samples and drop them into my Mp just to mess around with. I could see where this would be very confusing, but the Mp is really designed for drums or short samples and phrases. There's a long, and actually very cool, story about how it morphed into the actual sampler that it is today... but nevermind all of that. Do a little more investigating before you jump in and spend a lot of money on a piece of equipment that might not be right for you. Good luck and feel free to ask any more questions, I can see where this would be confusing.
wudsiba
Mp1k JJos2/2xl