mpc paint

what autozone paint would work exactly, i heard someone talking about the two tone ish from auto zone, can you then pick a color if it is two tone and secondly, how much of the original paint do i sand off, ohh i for got how many coats of each should i put on? if there are some instructions that would be nice, i dont wont to mess up ,, thankyou

use the search feature you should find the thread with the answers to your question, ya dig

king karnov wrote::lol: what autozone paint would work exactly, i heard someone talking about the two tone ish from auto zone, can you then pick a color if it is two tone and secondly, how much of the original paint do i sand off, ohh i for got how many coats of each should i put on? if there are some instructions that would be nice, i dont wont to mess up ,, thankyou

you don't need to sand....trust me, I was probably the first on here to do it.....my MPC looks fine......I put one coat of primer, one coat of paint, one coat of gloss.....AZ has about 3 color schemes if I'm not mistaken......

ARE U SURE DJ-T AND I THINK SOME OTHER CAT WAS TELLING ME TO USE SOME FINE GRAIN SAND PAPER, I GOT SOME HOBBY SHOP PAINT TO USE. aLSO HAVE PRIMER AND HI GLOSS PAINT TOO.

king karnov wrote:ARE U SURE DJ-T AND I THINK SOME OTHER CAT WAS TELLING ME TO USE SOME FINE GRAIN SAND PAPER, I GOT SOME HOBBY SHOP PAINT TO USE. aLSO HAVE PRIMER AND HI GLOSS PAINT TOO.

what reason do I have to lie??

http://pg.photos.yahoo.com/ph/brownbmbr75/detail?.dir=ce6a&.dnm=7e49.jpg&.src=ph[/url]

king karnov wrote:ARE U SURE DJ-T AND I THINK SOME OTHER CAT WAS TELLING ME TO USE SOME FINE GRAIN SAND PAPER, I GOT SOME HOBBY SHOP PAINT TO USE. aLSO HAVE PRIMER AND HI GLOSS PAINT TOO.

thats what i did. just use some real fiine sandpaper. it will make the primer adhere better. u can do without it, but i think its worth it.

can you use any old spray paint on it, my friends got some sick stencils I been thinking about putting on

Use a 400 grit wet/dry sandpaper. You can sand it wet or dry, wet will keep the sandpaper from clogging with paint. Afer you sand the unit wipe it dry. wipe the surface of the MPC with lacquer thinner. That will remove any oils from your fingers (oils will keep the paint from sticking properly). Then apply the primer. For best results let the primer dry over night. Next day lightly sand the primer wet with 400 grit sanpaper. wipe with laquer thinner and then finaly paint.

I used to paint cars so I know what I am talkin about. If you follow those steps you will have a paint job that will last and look great.

1 final thing use light coats of paint. If you put it on too heavy it will run and look uneven.

Good Luck,
Adrian

Boogie Man wrote:

king karnov wrote:ARE U SURE DJ-T AND I THINK SOME OTHER CAT WAS TELLING ME TO USE SOME FINE GRAIN SAND PAPER, I GOT SOME HOBBY SHOP PAINT TO USE. aLSO HAVE PRIMER AND HI GLOSS PAINT TOO.

what reason do I have to lie??

http://pg.photos.yahoo.com/ph/brownbmbr75/detail?.dir=ce6a&.dnm=7e49.jpg&.src=ph[/url]

yeah and u can see the chips and the spots where the paint is coming off. its not that big of a deal, follow what dude above me said.

binger0 wrote:

Boogie Man wrote:

king karnov wrote:ARE U SURE DJ-T AND I THINK SOME OTHER CAT WAS TELLING ME TO USE SOME FINE GRAIN SAND PAPER, I GOT SOME HOBBY SHOP PAINT TO USE. aLSO HAVE PRIMER AND HI GLOSS PAINT TOO.

what reason do I have to lie??

http://pg.photos.yahoo.com/ph/brownbmbr75/detail?.dir=ce6a&.dnm=7e49.jpg&.src=ph[/url]

yeah and u can see the chips and the spots where the paint is coming off. its not that big of a deal, follow what dude above me said.

my ish looks gangsta with paint chippin off. i color it back with black marker.

and you sanded yours??


btw, that chip is from being knocked against a turntable.....

send it off to http://www.forat.com