Opaleye1 wrote:Thanks again , enjoyed reading it all , and Charles R and Enoch L , Thanks
No problem, if you have issues pick up the MPC BIBLE and read the manual.
EnochLight wrote:
No worries - glad to have helped! But Charlie is wrong as usual. You can connect line-level to the RCA jacks just fine. There's a switch on the back that allows you to turn line level on instead of a phono input.
Charlie: do you even own a current MPC these days??

PAGE 16 or 18 of MPC X manual. Depending on which version you look at.http://b8e57dc469f9d8f4cea5-1e3c2cee90259c12021d38ebd8ad6f0f.r79.cf2.rackcdn.com/Product_Documents/MpcTuiManual.pdf_488c7330b3aa119f11953f54a6a3b8be.pdf8.Phono/Line Switch: Set this switch to the appropriate position, depending on which Input 3/4 connectors you want to use. If you are using the 1/4” (6.35 mm) inputs, set this switch to Line. If you are using the RCA inputs, set this switch to Phono to
provide the additional amplification needed for phono-level signals.or
How many inputs and outputs are on the MPC X?The MPC X features 8 balanced TRS outputs and 4 combo inputs. Inputs 1 and 2 will support mic and line levels (+48v phantom power available) and inputs 3/4 will support phono (RCA) and line level (1/4" TRS) inputs. Important:
The RCA inputs are intended only for phono-level audio. Please be sure not to connect line-level audio sources to this input. https://www.akaipro.com/kb/akai-pro-mpc-x-and-mpc-2-0-frequently-asked-questions/#IO