mpc1000 and micro korg

what's up family?

I am helping a friend with his setup. I did a huge search on here about this and am coming up with theories not solutions. I am not familiar with the micro korg. I was wondering if anyone can help.

Here's what we have going right now:

MPC
midi mode - receive channel 1
soft thru: off (also tried the other settings)
sync mode - in: 1; out: A (also tried the other settings)

On main screen:

type: MIDI; pgm: off ; Midi: 1A (also tried the other settings)

micro korg

midi channel: 1
local: off
clock: external

Is there anything else that needs to be done? we can't hear anything.

Any and all help is appreciated. Please no jokesters.

Thanks

you need a mixer

local should be on, on the korg.

I have the 1K<--->Micron...MPC output and Micron output into UB1202 mixer. Now if you want to control the synth sounds, soft thru must be on. My Micron has 3 options for local control: On(keys & MIDI), Off(MIDI only), and Off + pattern send.
MPC
Type: MIDI
PGM:Micron Bass, i.e.
MIDI:1A
Active Receive:1
Soft-Thru:A
Micron
Local Cntrl: Off(MIDI only)
MIDI Channel Setup:Multichannel
MIDI Sync: ext
MIDI Channel Tx:1
[/u]

you need audio cable from the korg to an amp. And local=on to hear what your playing.

macnifecent wrote:you need a mixer

a mixer for what? all i am trying to do is record the micro korg sounds into the mpc on a midi track.

So are u trying to use the korg as a controller/module? Or are you trying to sample korg sounds into the MPC?

did u read my post i'm doing exactly what you're trying to do. recording a midi track, which in returns plays back the sound on the synth. TURN ON SOFT THRU IN YOUR MPC!

Knoxximus wrote:So are u trying to use the korg as a controller/module? Or are you trying to sample korg sounds into the MPC?

what this guy is trying to do is play the korg's sounds via the korg's keys(bass line....) into/record in the mpc